Articulated truck simulator
Simformotion LLC rolls out a new Cat Simulators Articulated Truck System, which is set in a construction environment where operators can learn the same production applications found on actual worksites. The system features authentic
controls combined with simulated applications to teach controls
familiarization, machine walkaround, driving, hauling, braking,
two loading methods, underloading, full production cycle, and
an open training mode. Software records and reports the results of all
simulation sessions so instructors and users can track progress.
Simformotion LLC | www.simformotion.com
Atlas Copco introduces a line of bucket conveyors
to its silent demolition tool range of hydraulic attachments. Said to lower the overall cost of a job
by reducing the amount of equipment needed on
site, the four new buckets were engineered with
a wide aperture bucket and large capacity. The
output size adjusts from 0.5 to 4.75 inches, with a
slightly smaller output size in the smallest model.
The bucket jaws, which receive the most wear,
can be inverted. The top and bottom jaws can
be replaced or single jaws can be rotated by 180
degrees to extend wear and service life. The units
have just two grease points and a recommended
greasing interval of 30 hours.
Atlas Copco | www.atlascopco.us
Your full-line hydraulic breaker source
Need a breaker? No matter the size, we have what you need.
Mobile leachate and
The Neptune Evaporator System, from Neptune
Systems, offers a low-cost method for environmentally-sound leachate, storm water, and
wastewater disposal. It offers on-site disposal at
a cost of less than 1 cent per gallon by converting a liquid stream into an aerosol, which allows
the water to evaporate while contaminants settle
back in a narrow alley at the front of the evaporator. Mounted on a trailer for easy transport on
site or to multiple locations, the unit processes
an average of 4,000 gallons per hour and up to
9,000 gallons per hour in optimal conditions.
Neptune Systems | www.neptunewash.com
No matter which size you choose, Atlas Copco hydraulic breakers have a higher
power-to-weight ratio and are more efficient than previous models.
SB line—optimized for use on carriers in the 0.7 to 15-ton classes.
MB line—designed for carrier weight classes from 10 to 32 tons.
HB line—the heaviest breakers in the Atlas Copco range for use on carriers ranging from 22
to 140 tons.
Call your dealer today to learn how you can increase your productivity, improve performance
and decrease your total cost of ownership with the newest generation of hydraulic breakers
from Atlas Copco.
See us at the ICUEE Show — Booth #K360
Text INFO to 205-289-3782, or visit aggman.com/info.
Text INFO to 205-289-3789 or visit www.betterroads.com/info
AGGREGATES MANAGER September 2013 8/13/13 8:29 AM
8/16/13 2:07 PM