RMT EQUIPMENT
High-definition display
RMT Equipment's upgraded VEI Millennium 5 and Helper X loader scales
are now equipped with new high-definition color displays to improve visibility
in any angle and light condition. A new, removable Vprint ultra-fast thermal
printer can be located underneath the monitor or anywhere in the cab. Customers can start with the entry level VEI Millennium 5 and upgrade to the
advanced Helper X model as their needs grow in the future.
RMT Equipment Inc. | www.rmtequip.com | Text INFO to 205-289-3782 or visit aggman.com/info
SANDVIK
Low capital cost
Sandvik's CI521 impact crusher is part of the Prisec CI5xx series of horizontal shaft impact
crushers, which the company says provides customers with a low capital cost solution, optimum performance, good cubical shape, and the lowest operating cost per ton. The patented
crusher range was developed in response to customer demands, combining the ability to
configure one stationary crusher into either a primary or secondary configuration, which
makes it adaptable to a variety of applications.
Sandvik Construction | www.construction.sandvik.com | Text INFO to 205-289-3782 or visit aggman.com/info
SUPERIOR INDUSTRIES
Reduced setup time
Superior Industries' Swing Axle XTP TeleStacker conveyor shifts from
road to radial mode in just five to 10 minutes, drastically reducing the
45- to 60-minute setup time required by the original model. The conveyor's new power travel system is engaged by a pre-installed t-handle
mechanism that takes just seconds to engage and needs no maintenance
or guarding. Its new axle design requires fewer link arms during transport
and while in operational modes. The addition of a pivoting walking beam
allows for true wheel alignment during radial travel.
Superior Industries, North America | www.superior-ind.com
Text INFO to 205-289-3782 or visit aggman.com/info
TELSMITH
Crushing capabilities coupled with easy
maintenance
Telsmith says it engineered the T300 Cone Crusher for maximum uptime and productivity while delivering 300-horsepower performance and a crushing capacity of
125 to 400 metric tons per hour in abrasive quarry applications. The unit is designed
with six cylinders — fewer than conventional units — but offers large crushing force
avail¬ability. A patent-pending anti-spin feature (mounted on top of the machine for
ease of maintenance) prevents head spin to extend manganese life. Also patent-pending are the unit's hybrid bearings that offer both static and dynamic lift, which results
in greater lift to efficiently carry the crushing forces.
Telsmith | www.telsmith.com | Text INFO to 205-289-3782 or visit aggman.com/info
30
AGGREGATES MANAGER December 2013