Equipment World

December 2013

Equipment World Digital Magazine

Issue link: http://read.dmtmag.com/i/217452

Contents of this Issue

Navigation

Page 20 of 79

'S ITOR ED ICK P marketplace | by Amy Materson AMaterson@randallreilly.com CUSTOMIZABLE TRAILER Customize your lowboy with XL Specialized Trailers' 110 low-profile hydraulic detachable gooseneck trailer. Launched at the Great American Truck Show in Dallas, Texas, the XL 110 is a 53-foot-long, 2-axle unit rated for 110,000 pounds overall and 100,000 pounds in 16-foot concentrated. A flip and booster combo for the rear adds versatility for load distribution via the ability to make a 3+1 set-up with a spreader bar, or both flips can be added to run as a 4-axle. The trailer has 5-position variable ride height on the 10-foot6-inch-long low-profile gooseneck. The top of the gooseneck has brackets for loading the spreader bar, giving drivers more room on the main deck when the spreader bar is not needed. The 33-foot-6-inch-long main deck has an 18-inch loaded deck height with 6-inch ground clearance, and features raised Apitong decking, 9 bent D-rings per side and heavy duty removable swingout outriggers. A 13-horsepower Honda power unit with dual hydraulics is protected in a toolbox at the base of the neck, which also includes a 36-inch flip neck extension for use with a 4-axle truck. A 7-foot-long bucket well at the rear, with a plate on the bottom combined with the open boom trough in the rear bridge. This provides room to load an excavator arm without damaging the cylinder. Additional features include a 25,000-pound air ride suspension with a manual ride height and a raise and lower valve; psi tire inflation system with gauge; liquid filled air gauge; limit chains on all axles; cam covers; auto slack adjusters; batter backup; extra mid-turn lights; and a taillight package with an amber strobe. STURDY SKID STEERS QUICK SPECS V270 GEN:2 V330 GEN:2 Height to hinge pin (fully raised) 130.3˝ 131.2˝ Gross power @ rpm 72 hp @ 2,500 72 hp @ 2,500 Rated operating capacity 2,700 lbs. 3,300 lbs. Operating weight (approximate) 8,150 lbs. 9,090 lbs. unit weight with standard bucket, 175-lb. operator and full fuel tank Enhance efficiency when loading, dumping and stacking with Gehl's large frame V270 GEN:2 and V330 GEN:2 vertical-lift skid steers, which feature a 72-horsepower Tier 4 certified Yanmar diesel engine that incorporates DPF technology. Features include a selectable selfleveling option, hydraulic-powered Power-A-Tach system and Gehl's T-bar option offered as a control pattern. With rated operating capacities of 2,700 pounds and 3,300 pounds, respectively, the GEN:2 models offer torque ratings of up to 217 foot-pounds and hydraulic flow up to 35 gpm. The V270 GEN:2 offers more than 10 feet 10 inches of lift height, while the V330 GEN:2 has more than 10 feet 11 inches of lift height. Additional features include a customizable digital in-cab display that provides system information on coolant, fuel, battery, environmental and engine regeneration; a large operator's compartment with a cab forward design and lowered rear towers for improved visibility; a side-folding restraint bar and armrests with multiple adjustments; adjustable joystick and hand/foot control towers; and a mechanical or air-ride suspension seat. Serviceability is addressed via a wide rear door and engine hood, as well as gas spring assist on the tiltable Level II ROPS structure, for ease in accessing hydraulic components. EquipmentWorld.com | December 2013 21

Articles in this issue

Links on this page

Archives of this issue

view archives of Equipment World - December 2013