e ground bearing pressure of the CME-550X is less than
9 psi, depending on tools on board. Compare that to the 35 to
50 psi of a truck-mounted drill. You won't have to reschedule
jobs until the ground dries up or the snow melts. And it can
eliminate the need for expensive access roads. at can give
you a big edge when bidding jobs at tough-to-get-to sites.
However, if the job is on main street, the rubber tires will
not damage most paved surfaces. A front axle disconnect
allows you to shi from 4-wheel to 2-wheel drive to prevent
axle wind-up when driving on hard pavement.
No Road
No Problem
CENTRAL MINE EQUIPMENT COMPANY
4215 Rider Trail North, Earth City (St. Louis), Missouri, 63045 USA
Phone: 314-291-7700 1-800-325-8827 FAX: 314-291-4880
E-mail: info@cmeco.com Website: www.cmeco.com
CENTRAL MINE EQUIPMENT COMPANY CENTRAL MINE EQUIPMENT COMPANY
Once you get on location, the CME-550X has plenty of
power to get the job done. e hydraulic feed and retract
system provides 28,275 pounds of retract force and 18,650
pounds of down pressure. And fast retract is standard.
e rugged CME-550X. It'll get you to that remote job.
Road or no road.