Fuel Oil News

Fuel Oil News April 2015

The home heating oil industry has a long and proud history, and Fuel Oil News has been there supporting it since 1935. It is an industry that has faced many challenges during that time. In its 77th year, Fuel Oil News is doing more than just holding

Issue link: http://read.dmtmag.com/i/484540

Contents of this Issue

Navigation

Page 25 of 67

26 APRIL 2015 FUEL OIL NEWS | www.fueloilnews.com Bio: Shane Sweet is an energy and management consultant with clients in the heating oil, propane and motor fuel sec- tors, a Partner with the firm of Lake Rudd & Company. As of Nov. 1, 2014, he is the new executive director and technical director for the New York Propane Gas Association. He served the industry as President & CEO of the New England Fuel Institute "NEFI" from 2007 to 2011, and as Executive VP/Director and Lobbyist for the Vermont Fuel Dealers Association "VFDA" from 1993 to 2007. CoNTACT: He lives in Shaftsbury, Vt., and may be reached at shanemsweet@gmail.com or 802-558-6101 cell/text. Suggestions by readers for future column content, as well as general comments are welcome. http://www.linkedin.com/pub/ shane-sweet/7/a52/701 Shane Sweet OPERATIONAL INSIGHT I n February, I received an invite to attend an energy symposium at the Rensselaer Polytechnic Institute "RPI" in Troy New York. The event, sponsored and offered by the New York State Center for Future Energy Systems, a.k.a. "CFES," focused on energy materials, device development and testing, and systems engineering. At first blush the invitation struck me as more of a utility-leaning event, so I went expecting to be outnumbered 50:1 by utility execs, utility lobbyists, utility engineers. I registered with the intention of keeping tabs on what "the enemy" was up to. Even the utilities are capable of coming up with a good idea once in a while, and I am not above stealing their ideas for the benefit of our interests. Turns out, I was the only person in attendance from "our side," so I did my best to blend in. Consistent with the old adage about judging a book by its cover, upon my arrival I was clearly off-target as to who I thought my fellow attendees would be. The crowd was primarily from the tech- nical side of the energy technology development sector, including a very healthy dose of academic types, mostly Ph.D.s, multi-Ph.D.s, engineering and "hard science" masters candidates, a boatload of hardened field deployment experts and other heady types that spoke a techy, geeky dialect that was, after one got over the intimidating nature of it, very entertaining to listen to. Yes, for the most part, it was tough to follow: OK, OK, I had no idea what they were talking about, so I ask you: when, was the last time you sat at a buffet lunch table with seven others and the serious lunch banter was not about sports, power tools, golf or cars, but the "Synthesis of Ordered Nickel-Molybdenum Compounds for Hydrogen Evolution?" The programs and presentations focused on three avenues, with three sub presentations each: Energy Storage and Fuel Cells Power Electronics, Photovoltaics and Energy Efficiency Renewable Energy Systems and Grid Resiliency One of the presentations, "Furnace Optimization Using VectorwallTM Static Mixers," had the crowd on their feet. Some of my favorite titles include: Salt-reinforced Nanoporous Ceramic/poly- mer Electrolyte for Lithium Metal Batteries Identification of Successive "Unobservable" Data Attacks in Power Systems via Matrix Decomposition Hexacyanoferrate Films on Transition Metal Surfaces for Energy Storage Block Copolymer Derived Nanostructured Functional Materials for Energy Conversion and Storage Devices Screening of Ternary Nitride Thin Films for Fuel Cell Catalyst Supports And my hands-down favorite: Vibration Energy Harvesting on HVAC Ducts for Smart Building Applications The idea here is to use "ambient vibration energy" (read: rattling and shaking) to power sen- sors that can be used in buildings to drive monitors and controls that control heating, cooling and light- ing used in commercial buildings. Apparently, a lack of power to run the sensor nodes, apparently due to the impracticality and cost to run WIRES (oh, the humanity!), impedes the widespread adop- tion of so called Building Automation Systems or "BAS." BAS, I learned, is used to enhance user comfort, improve energy efficiency and reduce operations costs. The authors say that HVAC ducts and have "high potential for energy harvesting." The process uses small accelerometers (like the one in most smartphones, I guess) placed at various points in the HVAC system. So, imagine a silicon based electrostatic energy harvester capable of generating power, and eventu- ally use this power to run the low-power sensors and controls that dot the HVAC systems within a building or multiple buildings, and of course, store the power in some manner for later use. Let's face it: we have to get out more. Good Vibrations l F O N

Articles in this issue

Links on this page

Archives of this issue

view archives of Fuel Oil News - Fuel Oil News April 2015