Issue link: http://read.dmtmag.com/i/494044
800-580-7554 www.pulsetech.net ppc@pulsetech.net Pulse Technology The Proven Solution in Recovering Batteries PULSE TECCHNOLOGY 3 Battery Sulfation Battery sulfation is a wasting disease that kills 80% of batteries worldwide. PulseTech's patented Pulse Technology cures the sulfation problem. It is the ultimate solution for removing sulfate crystals from lead-acid battery plates. There is enough reactive material in the battery to keep it working for many years. However, over time sulfates build up until battery efficiency is reduced, preventing the battery from accepting and releasing energy, dramatically shortening the battery life until it dies. Pulse Technology removes and pre- vents the sulfate crystals, allowing room for the energy exchange to continue. Extend the Life of Your Battery Up To Five Times Through years of product development and independent scientific evaluation, it has been proven that if used routinely, Pulse Technology can extend bat- tery life cycles up to five times. This reduces overall costs and environmental waste. Pulse Technology uniquely positions PulseTech's line-up of battery maintenance products and no other known battery charging/maintenance system offers these specific restorative maintenance characteristics. New – Never Filled 0 Cycles 120 Cycles 240 Cycles 360 Cycles 480 Cycles 12-Volt Lead-Acid Batteries Charged with PulseTech Charger 12-Volt Lead-Acid Batteries Charged with Typical Charger How it Works Pulse Technology is delivered to the battery through a circuit which is independent of the charging circuit. This patented, high-frequency pulse waveform is of a specific amplitude and frequency that is precisely controlled by microprocessors. It rises rapidly in less than one microsecond to its maximum amplitude and gradually returns to zero. There is no abrupt stop and no battery drain. This waveform occurs 25,000 times a second and has been PROVEN through university and military studies to remove sulfation from the battery plates and return the lead sulfate back to the electrolyte solution. Visual Proof that Pulse Technology Works The photos opposite are from an independent study comparing Pulse Technology to conven- tional battery charging. The photos show actual battery plates after various charge and discharge cycles, which reveal the benefits of charging with Pulse Technology versus charging with a conven- tional charger. The top row shows plates from ac- tual batteries charged using PulseTech's patented Pulse Technology. The bottom row shows plates from batteries charged with a competitor's con- ventional charger. Note the development of lead- sulfate on the conventionally charged plates in the bottom row. Even after hundreds of cycles, the batteries charged using Pulse Technology have no sulfate accumulation, ensuring the batteries will still per- form at maximum peak capacity. Pulse Technology Waveform