PulseTech

2015 Commercial Catalog

Issue link: http://read.dmtmag.com/i/494044

Contents of this Issue

Navigation

Page 9 of 15

10 ppc@pulsetech.net www.pulsetech.net 800-580-7554 PRO-12-RP 12-Station Battery Maintenance System MAINTAINERS 10 Input Voltage: 110-240 VAC, 50-60 Hz No. of Outputs: 12 Max Charge DC Voltage: 14.7 V Max Charging DC Current: 750 mA Reverse Polarity Protected: Yes Box-to-Clamps Wire Length: 75" Dimensions: 7.25"L x 2.35"W x 1"H Weight: 2 lbs. Specifications • Maintains up to 12 batteries in factory-fresh condition • Works with all 12V batteries (AGM, VRLA, gel and flooded cell) • Pulse Technology reduces and prevents sulfation buildup • Maintains any combination of battery types/brands The 12-Station Battery Maintenance System preserves as many as twelve new and restored 12-Volt batteries at peak charge levels by keeping the plates in like-new condition during storage. A continuous cycle of low amp charging rotates through the twelve channels offsetting the normal discharge rate. At the same time, our optimized high frequency, patented Pulse Tech- nology waveform reduces the size and number of lead sulfate deposits so that your stored batteries will stay 'factory fresh' while waiting to be sold or installed. All batteries, even new ones, are subject to a naturally occurring build-up of lead sulfate deposits that reduce the battery's ability to accept, store and release energy. Batteries frequently spend months in transit and warehouses before being used. By then, they may have discharged as much as 50% un- less maintained during storage. The PRO-12-RP is easy to use. Simply connect from one to twelve 12-Volt batteries from a single AC outlet safely with no sparking between the leads. Each of the PRO-12-RPs charging stations operate in isolation from each other, allowing any combination of battery types and brands to be charged including VRLA, AGM, gel and flooded cell. LEDs located on the top of the unit show the condition of each battery. Two-year limited warranty. Both the PRO-12-RP and Battery Rack are used in the recovery portion of PulseTech's Battery Management Program. See pages 8 and 9 for more in- formation. LED Indicators Located on the top of the unit, the LEDs show the condition of each battery. RED - Battery is low YELLOW - Battery is marginal GREEN - Battery is ready for issue Audible Alarm indicates improper connection Note: LEDs cycle to show the status of each battery at a time. All LEDs will not be on at the same time, as shown. 746X915 PRO-12 -RP 12 Station Battery Maintenance System $179.95 735X243 PRO-12 -CLIPS 3-Cable Lead Replacement Set $24.95 B-RACK-1 Battery Rack The B-RACK-1 battery rack stores batteries while connected to the PRO-12- RP. It is perfect for storing up to 36 batteries safely while they are maintained with the PRO-12-RP 12-Station Battery Maintenance System. The PRO-12- RP can be attached directly onto the battery rack with screws or adhesive tape (not included) for ease of use. The battery rack is very strong with an 1800 lb. capacity rating. It's construct- ed of durable tubular black, powder coated steel and consists of four shelves constructed of black, tempered hardboard. The size is 48"H x 34.75"W x 22.5"D with a 26.25" header on top and PulseTech Products signage. 715X100 B-RACK-1 Battery Rack $350.00

Articles in this issue

Links on this page

Archives of this issue

view archives of PulseTech - 2015 Commercial Catalog