Water Well Journal

August 2015

Water Well Journal

Issue link: http://read.dmtmag.com/i/543740

Contents of this Issue


Page 14 of 71

e ground bearing pressure of the CME-550X is less than 9 psi, depending on tools on board. Compare that to the 35 to 50 psi of a truck-mounted drill. You won't have to reschedule jobs until the ground dries up or the snow melts. And it can eliminate the need for expensive access roads. at can give you a big edge when bidding jobs at tough-to-get-to sites. However, if the job is on main street, the rubber tires will not damage most paved surfaces. A front axle disconnect allows you to shi from 4-wheel to 2-wheel drive to prevent axle wind-up when driving on hard pavement. No Road No Problem CENTRAL MINE EQUIPMENT COMPANY 4215 Rider Trail North, Earth City (St. Louis), Missouri, 63045 USA Phone: 314-291-7700 1-800-325-8827 FAX: 314-291-4880 E-mail: info@cmeco.com Website: www.cmeco.com CENTRAL MINE EQUIPMENT COMPANY CENTRAL MINE EQUIPMENT COMPANY Once you get on location, the CME-550X has plenty of power to get the job done. e hydraulic feed and retract system provides 28,275 pounds of retract force and 18,650 pounds of down pressure. And fast retract is standard. e rugged CME-550X. It'll get you to that remote job. Road or no road.

Articles in this issue

Links on this page

Archives of this issue

view archives of Water Well Journal - August 2015