Aggregates Manager Digital Magazine
Issue link: http://read.dmtmag.com/i/594078
AGGREGATES MANAGER November 2015 12 AGGREGATES MANAGER November 2015 12 AGGREGATES MANAGER November 2015 12 Electromechanical vibrating feeder Deister Machine Co., Inc. rolls out its new Deister (EMF- Series) Two-Mass Electromechanical Vibrating Feeder, which is designed to allow greater control over high- capacity feed rates and productivity, while lowering cost per ton in a variety of applications. A number of features were engineered to streamline maintenance and improve reliability, includnig a high-profile infeed lip, a heavy- duty formed deck with replaceable liners, and a simpli- fied drive. Deister Machine Co., Inc. | www.deistermachine.com New self-contained desegregating conveyors McCloskey International introduces a new desegregating tele- scopic stacker as the first in the company's new line of self- contained desegregating conveyors. The 36-inch x 130-foot SDX-130 stacker has a fully automated and flexible control sys- tem to control material quality. The SDX-130 also has an on- board diesel hydraulic unit to make it more portable and keep the setup down to just 15 minutes. McClowskey International | www.mccloskeyinternational.com Belt scale for dry bulk material handling The belt scale from Superior Industries was designed for dry bulk material handling. It has a unique new design that allows opera- tors to avoid cutting or torching a conveyor frame during installa- tion. The scale can be installed without even interferring with the conveyor frame. The flush-mount belt scales were also designed with a sturdier weighbridge than most to prevent wobbling or tip- ping during installation. The integrator has an onboard Ethernet port, two RS-232 serial outputs, and a battery backup feature. The scale fits belt widths between 18 inches and 72 inches and is made for dry bulk applications of up to 3,000 tons per hour. Superior Industries | www.superior-ind.com A heavy-duty conveyor belt cleaner Martin Engineering has released a new line of super heavy-duty conveyor belt cleaners. The SHD Cleaners work on belts up to 10-feet wide, with loads up to 300,000 tons each day. The belts have CARP technology to give the perfect angle to match pulley diameter, and the urethane blades have 42 square inches of wear surface. The SHD Cleaners come in two models: the 1200 Series and the 600 Series. The 1200 Series was designed for conveyors with a pulley head larger than 48 inches in diam- eter and a belt width of 42 to120 inches. The 600 Se- ries is for pulleys smaller than 48 inches. Martin Engineering | www.martin-eng.com ROLLOUTS