Aggregates Manager Digital Magazine
Issue link: http://read.dmtmag.com/i/619545
11 AGGREGATES MANAGER | January 2016 Impact crusher increases safety and performance Metso releases the new Nordberg NP13 impact crusher, which is designed to increase safety and performance for secondary and tertiary applications. The NP13 has the same design as the NP15, but on a smaller scale. The NP13 has a steeper feed angle and can accept feed materials up to 14 inches. The NP13 only needs seven different liners for more flexibility in the use of side liners. The product also has a two-part rear frame for safer and easier access. Each crusher also comes standard with a patented self-rotation rotor system for setting adjustment and blow bar changes; it improves safety during maintenance. The crusher also can be outfitted with a fully hydraulic setting adjust- ment, third breaker plate, drive equipment, sensors, and automatic greasing. Metso | www.metso.com A more efficient drill rig Atlas Copco has updated its popular four-wheel-drive FlexiROC T15 R drill rig. The rig has been upgraded to have an extended feed of 12 feet, a robust foot attach- ment, a new 2.8-liter Cummins Tier 4 Final engine, and a 2.4 Hz Bluetooth radio remote control. The FlexiROC T15 R also has a 360-degree rollover feed system that lets the rig drill in just about any position. The rig's control system simplifies opera- tion by automatically adjusting impact and feed speeds in proportion to torque for high productivity. Atlas Copco | www.atlascopco.com Pump offers higher quality and performance McLanahan Corp. offers a new rubber lined slurry pump that was designed for improved quality. The M3H was designed with re-engineered plans from the Linapump lllr centrifugal slurry pump, with the same dimensions and similar hy- draulic performance. The design means that all components are interchangeable with existing pumps in current operations. Gland options include hydrostatic, packed, mechanical, and dry. The pump uses high-quality, abrasion resistant wear parts. McLanahan | www.mclanahan.com New conveyor axle configurations Masaba's portable radial stackers and magnum telescoping conveyors have new axle configuration options available from the company. The products are now available with Folding Axles (FA) and Hydra Shift chainless drive as options. The FA axles speed up the transi- tion between travel and operation, with each axle capable of being operated simultaneously. The new axle configurations are available on Radial Stackers up to 125 feet and some 36-inch models of the Magnum Telescoping Conveyor up to 150 feet. Masaba | www.masabainc.com