PulseTech

2016 Battery Maintenance Catalog

Issue link: http://read.dmtmag.com/i/620721

Contents of this Issue

Navigation

Page 13 of 15

www.xtremecharge.com 14 • Low-amperage patented pulsing charge offsets normal discharge rate • Maintains up to 12 batteries in "factory- fresh" condition indefinitely • Works with all 12-volt lead-acid batteries The PRO-12-RP 12-Station Battery Maintenance Sys- tem preserves new batteries at peak charge levels by keeping the plates in like-new condition during storage. It works with all 12-volt lead-acid batteries, including AGM, VRLA, flooded cell and gel, and keeps up to 12 batteries as new as the day they were manu- factured. Batteries that sit idle continually discharge and are subject to a naturally occurring build-up of lead sulfate deposits that reduce their ability to accept, store and release energy. PRO-12-RP tackles both problems. A continuous cycle of low-amp charging rotates through the 12 channels reversing the normal discharge rate. At the same time, optimized high-frequency patented pulsing reduces the size and number of lead sulfate deposits, so shelved batteries stay "factory fresh". The maintenance system uses a single ac outlet safely with no sparking between the battery leads. Each of the 12 stations operate in isolation from one another, allow- ing any combination of battery brands and types to be maintained at the same time. The PRO-12-RP initiates a self-test on each battery and LED indicators will come on red, yellow or green to indicate battery status. An au- dible alarm sounds if a battery is connected improperly. Then it begins cycling through each of the connected batteries maintaining them at optimum levels. Two- year limited warranty. PRO-12-RP 12-Station, 12-Volt Battery Maintenance System Input Voltage: 100-240 V ac, 50-60 Hz No. of Outputs: 12 Max Charge DC Voltage: 14.7 V Max Charging DC Current: 750 mA Reverse Polarity Protected: Yes Box-to-Clamps Wire Length: 72" Dimensions: 7.25"L x 2.35"W x 1"H Weight: 2 lbs. Specifications Applications Ideal for battery sales outlets and maintenance facilities that sell, stock or service lead-acid bat- teries. Fleet operators can keep new batteries in ready-to-go condition until they are installed on vehicles or equipment. Battery companies can reduce battery warranty claims. LED Indicators Located on the top of the unit, the LEDs show the condition of each battery. RED - Battery is low YELLOW - Battery is marginal GREEN - Battery is ready for issue Audible Alarm indicates improper connection Note: LEDs cycle to show the status of each battery at a time. All LEDs will not be on at the same time, as shown. MAINTAIN: PRO-12-RP 14 746X915 PRO-12-RP 12-Station Maintenance System 735X243 Replacement 3-Cable Module

Articles in this issue

Links on this page

Archives of this issue

view archives of PulseTech - 2016 Battery Maintenance Catalog