Bruckner's News

November/December 2016

Issue link: http://read.dmtmag.com/i/745575

Contents of this Issue

Navigation

Page 11 of 19

12 BRUCKNERTRUCK.COM T R U C K S • C A B S • S L E E P E R S • T R A I L E R S • P A R T S • Q U O T E S THE WORLD RIDES ON US ® HAULMAAX ® BOLSTER SPRINGS Half Beam HMX46K: 64179-048 Hendrickson's unique design and use of proprietary rubber compounds and bonding process, allows the bolster spring to absorb braking, acceleration, vertical and radial loads simultaneously. Delivering the demanding balance of ride and handling HAULMAAX ® / PLS SERVICE KIT 60961-712 (One side) All of the benefits of the genuine HAULMAAX bolster and PLS are provided in on bundled kit. Make the job easy by having all the correct parts the first time. BAR PIN END BUSHING Standard Bar Pin: 34013-088L w/shims Hendrickson's proprietary rubber recipe and bonding process provides a unique bushing that delivers industry leading performance. With the addition of the patented rotating bar pin version, you eliminate scrap and redo's as clocking to the pinion angle is not required. Just press in the bushing and rotate the pin to line up and install. When do you replace the HAULMAAX PLS on HN auxiliary spring? • Regardless if it's the PLS or the standard auxiliary spring – if it's 3" or shorter, replace it! • Always upgrade both sides of the HAULMAAX suspension to the PLS from the standard. • Replace the auxiliary springs (PLS) every time you replace bolster springs. (Cheap insurance to ensure maximum performance!) When do you replace HAULMAAX bolster springs? • 46K suspensions require the tie bar bolster version. • Always replace the tie-bar bolsters in the aermarkert. • Cuts or splits in the rubber over 1" in length and more than 3/8" deep require bolster replacement. • Bonding separation of the rubber from the metal surface of more than 1/2" deep, requires bolster replacement. • Bonding separation of the rubber from the metal surface of more than 1/2" deep, requires bolster replacement. • Bent, burred or overhanging edges of the bolster spring metal plates creating trapped rubber, require bolster replacement. HAULMAAX ® BOLSTER SPRINGS & BUSHINGS HAULMAAX ® TECH TIPS $ 233.84 $ 445.66 $ 100.39 December VENDOR SPOTLIGHT

Articles in this issue

Links on this page

Archives of this issue

view archives of Bruckner's News - November/December 2016