Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 111 of 385

1 800 255 4417 www.castrol.com/GPS March 2017 Industrial Lubricants Product Data Mineral-Based Gear Oils Saving Leaky Gearboxes In some applications, gearbox leaks are difficult to control for a number of reasons. Typically, maintenance personnel deal with this problem either by adding oil to the unit on a continual basis, which is rather costly and potentially unsafe; or, by converting to grease, which is a less-then-ideal gear lubricant. Castrol offers a unique solution with our Molub-Alloy GM 969 leak resistant gear oil. This oil employs a synthetic thickener that coagulates at the point of oil loss to stop the leak. While at the point of lubrication on the gears, it acts like other Castrol high-performance gear oils to provide long-term wear protection. In one case study at a steel mill, Molub-Alloy GM 969 eliminated shaker gearbox failures that previously leaked incessantly. 0 10000 20000 30000 40000 50000 60000 70000 MAINTENANCE TOTAL Lube Cost Make-Up Cost Parts Cost $64,190 $55,120 $5,070 $4,000 $8,450 $7,850 $650 $0 $ CASE STUDY MOLUB-ALLOY GM 969/320 IN SHAKER GEARBOXES BEFORE CASTROL AFTER CASTROL Cost savings associated with use of Molub-Alloy GM 969 in steel mill shaker gearboxes. Due to the heavy vibrations, seals were continually damaged and could not be fixed often enough to prevent large oil losses. After conversion to Molub-Alloy GM 969, oil loss was greatly reduced and gearbox failure was eliminated. G 6

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES