Issue link: http://read.dmtmag.com/i/814629
Gear Oils 1 800 255 4417 www.castrol.com/GPS March 2017 Industrial Lubricants Product Data Mineral-Based Optigear ® 1100 Description: Optigear 1100 range of high-performance extreme pressure gear oils was developed to tackle wear-related problems in heavily loaded industrial gears and bearings. These oils are typically used where heavy shock loads prevail and where long gearbox life is desired. Optigear 1100 is formulated with TGOA (Tribol Gear Oil Additive), a plastic deformation (PD) additive that improves performance by enabling the micro- smoothing of surface roughness without increasing wear. TGOA protects against scuffing and shock loading while maintaining a high load-carrying capacity and preventing the progression of wear in pre-damaged gears. Application: Formulated for gear applications, especially where heavy shock loads occur and long gearbox and oil life is desired. Also commonly used in gear couplings, bearings and heavy-duty reciprocating pumps for drilling mud or cement placement. Consult Castrol prior to use in worm gears with bronze wheel. Optigear ® BM Description: Optigear BM gear oils are formulated for extremely high pressures to reduce wear caused by surface fatigue, pitting, spalling, scuffing, scoring or surface irregularities. They are specially formulated with MICROFLUX TRANS (MFT), a plastic deformation (PD) additive that improves performance by enabling the micro-smoothing of surface roughness without increasing wear. MFT provides an extremely low coefficient of friction and a high load-carrying capacity while preventing the progression of wear in pre-damaged gears. Application: Recommended for gears and bearings operating under normal to extreme load conditions. Especially suitable for applications where long gear and oil life is desired. Consult Castrol prior to use in worm gears with bronze wheel. Typical Characteristics Optigear 1100 Product Viscosity @ 40˚C VI Base Oil Additives Zinc Flash Pt (COC) Pour Pt FZG EP Test SRV Coef of Friction 68 68 cSt 100 Mineral EP / TGOA Yes 457˚ F -27˚ F >12 0.07 – 0.09 100 100 cSt 100 Mineral EP / TGOA Yes 464˚ F -22˚ F >12 0.07 – 0.09 150 150 cSt 100 Mineral EP / TGOA Yes 473˚ F -17˚ F >12 0.07 – 0.09 220 220 cSt 100 Mineral EP / TGOA Yes 473˚ F -11˚ F >12 0.07 – 0.09 320 320 cSt 100 Mineral EP / TGOA Yes 477˚ F -6˚ F >12 0.07 – 0.09 460 460 cSt 95 Mineral EP / TGOA Yes 478˚ F -6˚ F >12 0.07 – 0.09 680 680 cSt 95 Mineral EP / TGOA Yes 482˚ F 0˚ F >12 0.07 – 0.09 1000 1000 cSt 100 Mineral EP / TGOA Yes 487˚ F 0˚ F >12 0.07 – 0.09 1500 1500 cSt n/a Mineral EP / TGOA Yes 500˚ F 5˚ F >12 0.07 – 0.09 Typical Characteristics Optigear BM Product Viscosity @ 40˚C VI Base Oil Additives Zinc Flash Pt (COC) Pour Pt FZG EP Test SRV Coef of Friction 68 68 cSt 110 Mineral EP / MFT Yes 428˚ F -11˚ F >12 0.06 – 0.08 100 100 cSt 105 Mineral EP / MFT Yes 428˚ F -6˚ F >12 0.06 – 0.08 150 150 cSt 100 Mineral EP / MFT Yes 437˚ F 0˚ F >12 0.06 – 0.08 220 220 cSt 100 Mineral EP / MFT Yes 446˚ F 5˚ F >12 0.06 – 0.08 320 320 cSt 100 Mineral EP / MFT Yes 455˚ F 5˚ F >12 0.06 – 0.08 460 460 cSt 100 Mineral EP / MFT Yes 464˚ F 10˚ F >12 0.06 – 0.08 680 680 cSt 93 Mineral EP / MFT Yes 473˚ F 16˚ F >12 0.06 – 0.08 1000 1000 cSt 90 Mineral EP / MFT Yes 482˚ F 16˚ F >12 0.06 – 0.08 3000 3000 cSt 110 Mineral EP / MFT Yes 428˚ F 32˚ F >12 0.06 – 0.08 G 9

