Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 115 of 385

Gear Oils 1 800 255 4417 www.castrol.com/GPS March 2017 Industrial Lubricants Product Data Synthetic Castrol's synthetic gear oils are specially engineered to handle extreme conditions with enhanced features such as thermal stability, high load carrying capacity, extreme pressure, high viscosity index and wide temperature range. Each of the synthetic gear oil lines is based on either a polyalphaolefin (PAO) or polyalkylene glycol (PAG) base and blended with additives to offer a unique technology for your specific application. Exceptional Lubrication with Polyalkylene Glycols (PAG) PAG synthetic lubricants such as Castrol Optigear Synthetic 800 range are unique in many ways and include the following benefits over other oil types: • Very high viscosity index (VHVI) • Low coefficient of friction • Excellent thermal stability • Improved efficiency of gearbox • Lower gearbox temps The VHVI of these lubricants permits them to be used in extremely low temperatures and in wide temperature ranges, often allowing for lubricant viscosity grades to be consolidated. When heated, the viscosity is maintained more closely to that of the original lubricant, providing greater oil film than other lubricants at elevated temps. The low coefficient of friction reduces the energy consumption, lowers gearbox temperature and increases the efficiency of the gears. This is particularly noted in worm gear drives where efficiencies are typically much lower than other gear sets. Spur Bevel Helical Worm Mineral Alpha SP 68 - 680 Mineral EP > 95 N 420°F - 445°F -6°F to +21°F ü ü ü û Molub-Alloy GM 90, 690, 300S, 1500 220, 320, 1000, 1500 Mineral EP / Solids 95 - 102 N 441°F - 482°F 0°F to 21°F üü üü üü û Molub-Alloy GM 170W 680 (AGMA 8C) Mineral Compounding / Solids 97 Y 471°F 16°F û û û üü Molub-Alloy GM 969 320 Mineral EP / Solids / Thickener 100 N 445°F 5°F üü üü üü û Optigear 1100 68 - 1500 Mineral EP / TGOA 95 - 100 Y 457°F - 500°F -27°F to 5°F üüü üüü üüü C Optigear BM 68 - 1000, 3000 Mineral EP / MFT 90 - 110 Y 428°F - 482°F -11°F to 32°F üüü üüü üüü C Synthetic Alphasyn EP 150 - 680 PAO EP 149 - 167 N 428°F - 464°F -54°F to -27°F üü üü üü C Alphasyn T 150 - 460 PAO AW 131 - 141 N 520°F - 545°F -44°F to -22°F üü üü üü üü Optigear RMO 150 PAO EP / MFT 133 Y 374°F -54°F üüü üüü üüü û Optigear Synthetic 800 150 - 1000, 2200 Polyglycol (PAG) EP 210 - 320 N 520°F - 554°F -33°F to 7°F üüü üüü üüü üüü Optigear Synthetic CT 320 PAO EP 174 - 180 N >482°F -49°F üüü üüü üüü û Optigear Synthetic RO 150 150 PAO EP / MFT 130 Y 410°F -49°F üüü üüü üüü û Optigear Synthetic X 220 - 460 PAO EP 151 - 179 N > 482°F -49°F to -17°F üüü üüü üüü û Food Grade Optileb GT 220, 460 PAO EP 151-157 N 410°F - 480°F -38°F to -33°F üü üü üü ü Gear Oils Performance 3 Product Name Base Oil Additives 1 ISO VGs Available Viscosity Index Zinc Flash Point Range 2 Pour Point Range 2 1 EP = Extreme Pressure/Anti-Scuff AW = Anti-wear 1 TGOA = Tribol Gear Oil Additive, a proprietary blend of EP additives capable of improving gear condition. 1 MFT = MicroFlux Trans, a proprietary blend of EP additives capable of improving gear condition. 2 Varies by viscosity grade 3 Increasing performance from 1 to 3 checks. C = Consult Castrol Representative prior to use Synthetic Gear Oils Spur Bevel Helical Worm Mineral Alpha SP 68 - 680 Mineral EP > 95 N 420°F - 445°F -6°F to +21°F ü ü ü û Molub-Alloy GM 90, 690, 300S, 1500 220, 320, 1000, 1500 Mineral EP / Solids 95 - 102 N 441°F - 482°F 0°F to 21°F üü üü üü û Molub-Alloy GM 170W 680 (AGMA 8C) Mineral Compounding / Solids 97 Y 471°F 16°F û û û üü Molub-Alloy GM 969 320 Mineral EP / Solids / Thickener 100 N 445°F 5°F üü üü üü û Optigear 1100 68 - 1500 Mineral EP / TGOA 95 - 100 Y 457°F - 500°F -27°F to 5°F üüü üüü üüü C Optigear BM 68 - 1000, 3000 Mineral EP / MFT 90 - 110 Y 428°F - 482°F -11°F to 32°F üüü üüü üüü C Synthetic Alphasyn EP 150 - 680 PAO EP 149 - 167 N 428°F - 464°F -54°F to -27°F üü üü üü C Alphasyn T 150 - 460 PAO AW 131 - 141 N 520°F - 545°F -44°F to -22°F üü üü üü üü Optigear RMO 150 PAO EP / MFT 133 Y 374°F -54°F üüü üüü üüü û Optigear Synthetic 800 150 - 1000, 2200 Polyglycol (PAG) EP 210 - 320 N 520°F - 554°F -33°F to 7°F üüü üüü üüü üüü Optigear Synthetic CT 320 PAO EP 174 - 180 N >482°F -49°F üüü üüü üüü û Optigear Synthetic RO 150 150 PAO EP / MFT 130 Y 410°F -49°F üüü üüü üüü û Optigear Synthetic X 220 - 460 PAO EP 151 - 179 N > 482°F -49°F to -17°F üüü üüü üüü û Food Grade Optileb GT 220, 460 PAO EP 151-157 N 410°F - 480°F -38°F to -33°F üü üü üü ü Gear Oils Performance 3 Product Name Base Oil Additives 1 ISO VGs Available Viscosity Index Zinc Flash Point Range 2 Pour Point Range 2 1 EP = Extreme Pressure/Anti-Scuff AW = Anti-wear 1 TGOA = Tribol Gear Oil Additive, a proprietary blend of EP additives capable of improving gear condition. 1 MFT = MicroFlux Trans, a proprietary blend of EP additives capable of improving gear condition. 2 Varies by viscosity grade 3 Increasing performance from 1 to 3 checks. C = Consult Castrol Representative prior to use Spur Bevel Helical Worm Mineral Alpha SP 68 - 680 Mineral EP > 95 N 420°F - 445°F -6°F to +21°F ü ü ü û Molub-Alloy GM 90, 690, 300S, 1500 220, 320, 1000, 1500 Mineral EP / Solids 95 - 102 N 441°F - 482°F 0°F to 21°F üü üü üü û Molub-Alloy GM 170W 680 (AGMA 8C) Mineral Compounding / Solids 97 Y 471°F 16°F û û û üü Molub-Alloy GM 969 320 Mineral EP / Solids / Thickener 100 N 445°F 5°F üü üü üü û Optigear 1100 68 - 1500 Mineral EP / TGOA 95 - 100 Y 457°F - 500°F -27°F to 5°F üüü üüü üüü C Optigear BM 68 - 1000, 3000 Mineral EP / MFT 90 - 110 Y 428°F - 482°F -11°F to 32°F üüü üüü üüü C Synthetic Alphasyn EP 150 - 680 PAO EP 149 - 167 N 428°F - 464°F -54°F to -27°F üü üü üü C Alphasyn T 150 - 460 PAO AW 131 - 141 N 520°F - 545°F -44°F to -22°F üü üü üü üü Optigear RMO 150 PAO EP / MFT 133 Y 374°F -54°F üüü üüü üüü û Optigear Synthetic 800 150 - 1000, 2200 Polyglycol (PAG) EP 210 - 320 N 520°F - 554°F -33°F to 7°F üüü üüü üüü üüü Optigear Synthetic CT 320 PAO EP 174 - 180 N >482°F -49°F üüü üüü üüü û Optigear Synthetic RO 150 150 PAO EP / MFT 130 Y 410°F -49°F üüü üüü üüü û Optigear Synthetic X 220 - 460 PAO EP 151 - 179 N > 482°F -49°F to -17°F üüü üüü üüü û Food Grade Optileb GT 220, 460 PAO EP 151-157 N 410°F - 480°F -38°F to -33°F üü üü üü ü Gear Oils Performance 3 Product Name Base Oil Additives 1 ISO VGs Available Viscosity Index Zinc Flash Point Range 2 Pour Point Range 2 1 EP = Extreme Pressure/Anti-Scuff AW = Anti-wear 1 TGOA = Tribol Gear Oil Additive, a proprietary blend of EP additives capable of improving gear condition. 1 MFT = MicroFlux Trans, a proprietary blend of EP additives capable of improving gear condition. 2 Varies by viscosity grade 3 Increasing performance from 1 to 3 checks. C = Consult Castrol Representative prior to use The viscosity of oils drops with temperature, but PAG oils maintain viscosity better than mineral oils and other synthetics do. At 104˚F, all of these lubricants are 320 cSt viscosity; but at 200˚F, the mineral oil and PAO are much lower in viscosity than the PAG (Castrol Optigear Synthetic 800/320). 25 250 100 120 140 160 180 200 Viscosity (cSt) Temp (˚F) Viscosity-Temp Relationship of Various Lubricants PAG (ISO 320) PAO (ISO 320) Mineral (ISO 320) G 10

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES