Issue link: http://read.dmtmag.com/i/814629
Gear Oils 1 800 255 4417 www.castrol.com/GPS March 2017 Industrial Lubricants Product Data Synthetic Optigear ® Synthetic RO 150 Description: Optigear Synthetic RO 150 is a high-performance gear oil developed for drive units in rail-borne traffic, machine construction and robotics at extreme climatic conditions. The MICROFLUX TRANS additive combination is solids-free; adjusts itself to varying conditions; and actively reduces wear, even under the most difficult operating conditions. Optigear Synthetic RO 150 exceeds the wear protection requirements of DIN 51517, Part 3 and is approved for use in KUKA and ABB Automation robots. Application: Formulated for gears in rail-borne, robot, and machine construction applications, especially in wide temp ranges. Suitable for high loads and shock loads. KUKA and ABB approved for robot applications. Optigear ® Synthetic X Description: Optigear Synthetic X is based on synthetic hydrocarbons (PAO) and a special plastic deformation (PD) surface improvement additive package. The additive package, when activated by high specific loads and corresponding temperatures, helps to equalize surface roughness without creating abrasion and leads to surface smoothing and improvement. Optigear Synthetic X provides excellent resistance to micro-pitting and delivers exceptionally long oil life, even in difficult applications such as wind turbines. Application: Formulated specifically for use in wind turbine gear box applications, but suitable for all types of enclosed gears where anti-scuff/EP oil is required and long gear and oil life are desired. Good choice for wide temp range applications. Typical Characteristics Synthetic X Product Viscosity @ 40˚C VI Base Oil Additives Zinc Flash Pt (COC) Pour Pt FZG EP Test FZG Micro- pitting 220 218 cSt 151 PAO EP No >482˚ F -27˚ F >14 >10 (high) 320 325 cSt 152 PAO EP No >482˚ F -27˚ F >14 >10 (high) 320 WTO 325 cSt 179 PAO EP No >482˚ F -49˚ F >14 >10 (high) 460 459 cSt 153 PAO EP No >482˚ F -17˚ F >14 >10 (high) Typical Characteristics Synthetic RO 150 Viscosity @ 40˚C VI Base Oil Additives Zinc Flash Pt (COC) Pour Pt FZG EP Test 150 cSt 130 PAO EP / MFT Yes 410˚ F -49˚ F >12 G 14

