Issue link: http://read.dmtmag.com/i/814629
1 800 255 4417 www.castrol.com/GPS March 2017 Industrial Lubricants Product Data Multi-Purpose, High-Performance Greases Tribol ® GR 100 PD Description: Tribol GR 100 PD greases are formulated with highly refined mineral oils and fortified with the Microflux Trans (MFT) additive system using a lithium-based thickener. The MFT additive technology provides optimum wear protection and an extremely low coefficient of friction even under extremes of pressure, vibration, shock loads or varying speeds. These greases are ideal for extended service in bearings in heavy-duty service and provide optimum wear protection and water resistance. Application: Extended service for bearings in difficult operating conditions such as heavy or shock loads, vibrations and wide temperature ranges (-30°F to +285°F). Tribol GR 100-0 PD and 100-00 PD are semi-fluid lubricants for use in some gear and slideway applications. Excellent grease for motor bearings (GR 100-2 PD) and robots. Tribol ® GR 1350-2.5 PD Description: Tribol GR 1350-2.5 PD grease is formulated on a lithium soap-base with an extremely high viscosity base oil containing the advanced Microflux Trans (MFT) additive package. The MFT additive technology provides optimum wear protection and an extremely low coefficient of friction even under extremes of pressure, vibration, shock loads or speeds. This grease provides outstanding load-carrying capacity, good adhesion and excellent water resistance even in underwater applications. Application: Low speed, high pressure bearings in vibrating, dusty or wet environments. Well suited for mining, steel and tube mill applications, as well as yaw gears and bearings on wind turbines and equipment undersea or exposed to sea water. Use at temperature ranges from -15˚F to +280˚F. Typical Characteristics Product Thickener Additives NLGI Base Oil Base Oil Vis. @ 40C Drop Point SRV Test Coef of Friction Scar Diam GR 100-00 PD Lithium EP / MFT 00 Mineral 130 cSt n/a 0.08 0.65 mm GR 100-0 PD Lithium EP / MFT 0 Mineral 130 cSt n/a 0.07 0.65 mm GR 100-1 PD Lithium EP / MFT 1 Mineral ISO 100 374˚ F 0.07 0.65 mm GR 100-2 PD Lithium EP / MFT 2 Mineral ISO 100 392˚ F 0.07 0.65 mm Typical Characteristics Product Thickener Additives NLGI Base Oil Base Oil Vis. @ 40C Drop Point SRV Test Coef of Friction Scar Diam GR 1350-2.5 PD Lithium EP / MFT 2.5 Mineral 1350 cSt 482˚ F 0.08 0.53 mm I 8

