Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 152 of 385

1 800 255 4417 www.castrol.com/GPS March 2017 Industrial Lubricants Product Data High and Low Temperature Greases Braycote ® 2115-2 Description: Braycote 2115-2 grease is formulated from an advanced perfluoropolyether (PFPE) synthetic fluid and a blend of performance additives and lubricating solids, and then thickened with a temperature- stable non-soap polytetrafluoroethylene (PTFE) base. This formulation makes Braycote 2115-2 an excellent high-temperature, thermally stable, synthetic bearing lubricant with exceptional wear protection to greatly extend service life of components and extend re-lubrication intervals. This grease is virtually inert, resisting hardening at high temperatures and preventing degradation by organic solvents, oxygen and most chemicals. Application: For use in bearings requiring very long-term re-lubrication frequencies and drip-free performance in high temperature applications such as oven conveyors and paint drying ovens. Suitable for continuous service to 480˚ F and intermittent service to 536˚ F. Braycote ® Inertox 2 Description: Braycote Inertox 2 grease is formulated from an advanced perfluoropolyether (PFPE) synthetic fluid, thickened with a temperature-stable non-soap polytetrafluoroethylene (PTFE) base, and fortified with a blend of additives and lubricating solids. This grease is one of the most chemically and thermally stable lubricants in Castrol's portfolio while also imparting excellent lubricating abilities, resistance to most solvents and additional corrosion protection. Application: Very long-term applications in bearings under high temperature or other hostile conditions where an inert and corrosion-resistant lubricant is required. Well suited for paint drying lines, oven carriages and vacuum chambers. Wide temperature range: -15˚ F to +500˚ F Typical Characteristics Product Thickener Additives NLGI Base Oil Base Oil Vis. @ 40C Drop Point Evap loss, 24 hrs @ 450˚F Braycote 2115-2 PTFE Solids 2 PFPE 510 cSt None 1.0% Typical Characteristics Product Thickener Additives NLGI Base Oil Base Oil Vis. @ 40C Drop Point Rust Protection (SKF Emcor) Braycote Inertox 2 PTFE Solids 2 PFPE 150 cSt* None 0/0 * Increases to 500 cSt above 100˚C temperature exposure I 14

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES