Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 153 of 385

1 800 255 4417 www.castrol.com/GPS March 2017 Industrial Lubricants Product Data High and Low Temperature Greases Molub-Alloy ® 1000 HT Description: Molub-Alloy 1000 HT is a high temperature grease formulated with synthetic base oils selected for controlled low volatility, minimum residue after evaporation and high viscosity index. It utilizes a blend of Molub-Alloy lubricating solids for superior lubrication, film strength and physical stability at prolonged high-temperature service. Application: Well suited for lubrication of bearings at temperatures up to 550° F with intermittent exposure to 650° F. Excellent protection in high loads, shock loads and wet conditions. Tribol ® GR SW 1.5 Description: Tribol GR SW 1.5 grease is formulated with a lithium-complex thickener and contains a synthetic base fluid plus premium extreme pressure (EP) additives. The thickener provides excellent adhesion, structural stability, sealing effects and water resistance. The synthetic base oil provides low coefficient of friction, excellent low temperature pumpability and very low starting and running torque. It also offers the potential for energy savings and operating temperature reductions in the load zone of rolling and sliding bearings. It is primarily intended for a wide variety of applications at extremes temperatures and provides excellent protection against wear, rust and corrosion. Application: Wide temperature (-40˚ F to +350˚ F) and long-term applications subject to high loads and low-to-moderate speeds and moisture. Well suited for lubrication of main, pitch and yaw bearings in wind turbines and for use in steel, paper, cement and other industries. Typical Characteristics Product Thickener Additives NLGI Base Oil Base Oil Vis. @ 40C Drop Point 4-Ball Wear Water Wash @ 175˚F Molub-Alloy 1000 HT Organic Sodium EP / Solids 1 Synthetic 540 cSt >500˚ F 0.42 mm 4% Typical Characteristics Product Thickener Additives NLGI Base Oil Base Oil Vis. @ 40C Drop Point 4-Ball Weld 4-Ball Wear Tribol GR SW 1.5 Lithium Complex EP 1.5 Synthetic ISO 460 >500˚ F 315 kg 0.40 mm I 15

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES