Issue link: http://read.dmtmag.com/i/814629
1 800 255 4417 www.castrol.com/GPS March 2017 Industrial Lubricants Product Data High and Low Temperature Greases Tribol ® GR 4541 HT Description: Tribol GR 4541HT is a wide temperature grease formulated with fully synthetic base oils to meet the aggressive service requirements associated with mills and plants producing engineered wood, primary metals, castings, cement, glass and paper. This grease is designed to extend the life of bearings in high temperature service where loads are moderate to heavy, greatly exceeding the performance of conventional complex greases. Tribol GR 4541 HT performs well across a variety of speeds and can be pumped through central systems even at very low temperatures. Application: Lubrication of bearings operating at high and low temps (-40˚ F to +450˚ F) under moderate to heavy loads. Excellent as an all-around plant grease to cover almost any application. Molub-Alloy ® 6780 Description: Molub-Alloy 6780 grease is a uniquely compounded lubricant that is specifically formulated for extreme cold operating conditions. It is designed for use on heavy-duty equipment in temperatures as low as -40° F, providing maximum protection to bearings and bushings. It achieves this performance by utilizing Castrol's proprietary Molub-Alloy lubrication package, which promotes anti-wear and load carrying properties beyond those of conventional lubricants. The selected blend of lubricating solids works synergistically with anti-wear and extreme pressure (EP) additives to reduce contact temperatures and provide excellent anti-weld protection under extreme pressure and shock loading. Application: Specifically formulated for low temperature lubrication (down to -40˚ F) of heavy-duty bearings and bushings on mining draglines and shovels. Well suited for other heavy-duty applications in low temperature service. Typical Characteristics Product Thickener Additives NLGI Base Oil Base Oil Vis. @ 40C Drop Point 4-Ball Weld Water Wash @ 175˚F Low Temp Torque @ -40˚C Tribol GR 4541 HT Lithium Complex EP 1 Synthetic ISO 150 >500˚ F 250 kg 3.1% 2.63 Nm Typical Characteristics Product Thickener Additives NLGI Base Oil Base Oil Vis. @ 40C Drop Point 4-Ball Weld 4-Ball Wear Molub-Alloy 6780 Lithium EP / Solids (5% moly) 1 Semi- Synthetic 130 cSt 394˚ F 400 kg 0.43 mm I 16

