Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 248 of 385

Technical Training and Reference Info Metalworking Technical Training Cutting and Grinding 1 800 255 4417 www.castrol.com/GPS March 2017 Workpiece Metallurgy Magnesium Magnesium and its alloys are easy to machine and have good chip formations; however, they are quite flammable, so fire can be a concern. This material is very lightweight and strong, so it finds uses in aerospace, automotive and missile applications. But generally speaking, magnesium is not used as frequently in industry as steel and aluminum are. Light viscosity neat oils have traditionally been used to eliminate oxygen at the chip/tool interface to prevent heat and fires. Oil-containing water soluble coolants have been used more recently, but sump life is typically low due to build-up of magnesium ions in solution, which splits the emulsion. Synthetic fluids should not be used, as the lack of oil and presence of oxygen in the water leads to fires. Some magnesium alloys are sensitive to stain, so proper fluid selection is needed to prevent this. Aluminum Pure aluminum is awkward to machine. It adheres to the cutting tool and is often called "gummy" for this reason. Most machining grades contain at least small amounts of copper to improve the overall machinability. Silicon is another common alloying element used to improve the casting properties of aluminum. This produces a material with a soft base but hard abrasive particles dispersed throughout, which can lead to increased tool wear. Aluminum alloys are classified by wrought and cast types as outlined in Figures 16 and 17. Fatty materials and EP additives formulated into the coolant will aid in preventing tool wear and producing good surface finish of aluminum parts. Moderate pH and/or stain-preventing additives are needed to ensure workpieces are not discolored when exposed to the coolant. Figure 16. Classification of wrought aluminum alloys. Figure 17. Classification of cast aluminum alloys. Major Classification of Wrought Aluminum AA Designation Type 1xxx Pure (99% min) aluminum 2xxx Copper aluminum 3xxx Manganese aluminum 4xxx Silicon aluminum 5xxx Magnesium aluminum 6xxx Magnesium-silicon aluminum 7xxx Zinc aluminum 8xxx Lithium alloys Major Classification of Wrought Aluminum AA Designation Type 1xx.x Pure (99% min) aluminum 2xx.x Copper aluminum 3xx.x Manganese aluminum 4xx.x Silicon aluminum 5xx.x Magnesium aluminum 7xx.x Zinc aluminum 8xx.x Lithium alloys Q11

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES