Issue link: http://read.dmtmag.com/i/814629
Corrosion Preventives Technical Training and Reference Info Metalworking Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Corrosion Preventive Care Care of Aqueous Corrosion Preventives Aqueous rust preventives share many properties with water-based metal removal fluids. They can be monitored and treated similar to coolants. Fluid condition and contamination levels can be determined and trends can be watched, with intervention as necessary. Synthetic Aqueous Rust Preventive Monitoring • Concentration by alkalinity • Fatty acid corrosion inhibitor % • pH • Water hardness • Dirt • Fungus • Bacteria • Free oil • Chlorides Emulsion Rust Preventive Monitoring • Concentration by Alkalinity • Acid Split • pH • Water hardness • Dirt • Bacteria • Fungus • Tramp Oil% Treatments can include the use of biocides or fungicides as needed to control any biological growth, as well as concentration adjustments to keep operating conditions at a level to provide good rust control. Contaminants like hardness or chlorides can be monitored and rust preventive disposal can be recommended to avoid risking operation at levels where rust control may be compromised. Dirt levels can be monitored to alert that filtration may need investigating. Care of Thixotropic Corrosion Preventives Thixotropic rust preventives are usually applied by dipping or spraying. The spraying method may require cleaning of spray nozzles from time to time, care of pumps, etc. The fluid is not recycled in any fashion. Any vessels or tanks that contain the inhibitor must be covered to avoid dust from contaminating the rust preventive. Care of Specialty Corrosion Preventives Specialty rust preventives consisting of water-based wax emulsions are usually applied by spray or dip methods. Spray applied fluid should not be recycled, as spraying causes evaporation (disrupts the solids-to-water balance) and it is possible for overspray to collect dust. Fluid kept in dip tanks should be monitored for concentration and adjusted with water adds (deionized water is best) as it is lost due to evaporation. If water content is not monitored and controlled, excessively heavy wax films can be expected. This could result in an unsatisfactory appearance or loss of fit, and even unusual torque readings if used as a protective lubricant on fasteners. Care Summary With diligent and reasonable care, corrosion inhibitors can be maintained to provide the user with reliable workpiece rust protection, appropriate for the length of protection that is required. Q48

