Issue link: http://read.dmtmag.com/i/814629
1 800 255 4417 www.castrol.com/GPS March 2017 Cutting and Grinding Synthetics Metalworking Fluids Product Data Oil-Accepting Synthetic Coolants Elimination of Clinkers and Fungus Where cast iron is the primary metal being machined, "clinkers" or masses of rusty chips can be extremely challenging to eliminate. Castrol's Syntilo oil-accepting coolants are uniquely designed to eliminate clinkers as well as the growths of fungus that are often associated with them. Shown at right is a close-up picture of a rusty mass of cast iron with fungus growing around it. This situation at a major compressor manufacturer was eliminated with Syntilo 2109. Rusty Mass of Chips (a.k.a. "clinkers") and Fungus Syntilo ® 1023 Description: Syntilo 1023 is an oil-dispersing synthetic coolant formulated for use in cast iron transfer lines and high tramp oil systems. It is engineered to disperse small amounts of tramp oil throughout the fluid to create a thin film that protects parts, chips and machine surfaces. This unique oil-dispersing characteristic reduces corrosion and prevents "clinkering." When idle, Syntilo 1023 will reject the tramp oil to allow for skimming. Application: Machining and grinding of ferrous metals, especially in cast iron transfer lines and other high tramp oil situations Syntilo ® 2109 Description: Syntilo 2109 is an oil-absorbing synthetic coolant formulated for cast iron transfer lines and general machining of ferrous alloys. It absorbs 1-2% tramp oil to improve lubrication, enhance corrosion protection and prevent clinkering of cast iron chips. Unlike soluble oils, which are typically used in these applications, Syntilo 2109 resists microbial attack and remains clean-running to extend system life. Application: Machining and grinding of ferrous metals, especially in cast iron transfer lines and other high tramp oil situations *Not all approvals are listed in this document. Approval types vary by company and may be plant-specific or related primarily to health and safety. Please contact Castrol for specific approval questions. Typical Properties Syntilo 1023 Appearance of Concentrate Clear yellow fluid Appearance of Dilution Transparent pH of 5% dilution 9.1 – 9.5 Refractometer Factor 1.6 Approvals* Ford, Honda Typical Properties Syntilo 2109 Appearance of Concentrate Clear yellow fluid Appearance of Dilution Transparent pH of 5% dilution 9.1 – 9.6 Refractometer Factor 1.8 Approvals* Ford, Honda B 11

