Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 346 of 385

Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Greases and Bearings Grease Characteristics Figure 12. Roll Stability Test. Courtesy of "The Lubrication Engineers Manual, " AIST. Shear Stability Test (Figure 11) Tests the ability of the grease to withstand repeated working • Uses a holed piston to work the grease • Typically, tests of 60 and 10,000 strokes are run • Reported as % change in consistency (softening or hardening) • A result of <5% is considered Excellent and >15% as Fair to Poor. Figure 11. Shear Stability Test worker. Roll Stability Test (Figure 12) Determines mechanical stability of grease in rolling conditions • Uses a weighted roller inside a cylinder to work the grease • Cylinder rotates at 165 RPM for 2 hours • Reported as % change in consistency (softening or hardening) • May be modified to add water and/or heat to simulate real world conditions Shear Stability/Roll Stability Grease stability can be measured in several ways. Two of the most important tests to determine the integrity of the grease structure are the Shear Stability Test and Roll Stability Test. R60

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES