Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 348 of 385

Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Greases and Bearings Bearings Anti-Friction Bearings Anti-friction, or rolling element, bearings reduce friction by supporting and distributing the load on numerous rolling elements (balls or rollers). For many applications such as high speeds this can be an advantage over plain bearings, which theoretically bear the load on a single line. Some friction must be present to ensure that the rolling elements roll versus just slide. This characteristic is called traction friction. Anti-friction bearings have four main components (Figure 16): • Outer Ring — Machined raceway for the rollers — Typically mounted in a bearing housing and remains stationary • Inner Ring — Machined raceway for the rollers — Typically mounted on a rotating shaft • Rolling Elements — Balls or rollers of various shapes • Retainer (or Cage) — Separates and positions rolling elements — Typically made of a softer steel or copper alloy Bore Outside Diameter Outer Ring/Raceway Inner Ring/Raceway Rolling Element (ball or roller) Retainer (Cage) Figure 16. Components of a ball bearing. Rolling element bearings are generally made of hardened, high-carbon steel alloys. Bearing sizes and dimensions have been standardized by the American Bearing Manufacturers Association (ABMA). Many designs of anti-friction bearings exist for supporting radial loads, axial (thrust) loads or both. The style of rolling element chosen depends on the degree of load, direction of load and bearing speed (Figure 17). Figure 17. Bearing rolling element types. Balls have single-point contact, providing lower friction for high speeds but preventing them from handling high loads. In contrast, rollers have line contact, which provides greater load carrying ability but reduced speed capability (Figure 18). Figure 18. Rolling element contact type under unloaded and loaded conditions. The most common rolling element bearing designs and their characteristics are shown in Figure 19 on the next page. Ball Cylindrical Tapered Spherical Needle Actual conditions under load Load Point Contact (ball) Line Contact (roller) R62

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES