Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 359 of 385

Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Slideway Oils Slideway Oils Mineral base oils are by far the most commonly used to provide the proper viscosity. Vegetable oils and some synthetics may be used to provide biodegradability. Generally, synthetics typically used for other purposes – such as long life – are not used for slideway oils, since the oil is "once-through" and not recirculated. Wear Protection and Stick-Slip Prevention Slideway oils must protect metal components from wear through proper anti-wear additives. In addition, these fluids require a friction modifier to prevent the phenom- enon known as stick-slip, or "chatter," which can occur as the slide changes direction and speed. To verify this property, slideway oils should pass the Cincinnati Milacron Stick-Slip test, which requires the ratio of static coefficient of friction to dynamic coefficient of friction be 0.8 or lower. To prevent stick-slip (chatter): Static Coefficient of Friction/ Dynamic Coefficient of Friction < 0.8 Typically, friction modifiers are sulfurized oils and esters, fatty compounds or vegetable oils, which allow the starting friction (static) to be lower than the constant moving friction (dynamic). This property prevents metal-to-metal sticking at zero speed (stopped or changing directions). All Castrol slideway oils pass the stick-slip test and provide a high level of wear protection. Castrol Tribol SW MWO way oils provide additional wear protection through the use of "Liquid Solids" that are fully dissolved but act similarly to solid lubricants in service so as to provide protection under boundary film conditions. Resistance to Coolant Wash Metalworking fluids are designed with a high degree of detergency to maintain clean machines and coolant systems. But while this property provides benefits in many areas, it can be detrimental to slideways by washing away the lubricant. Slideway oil must be designed to prevent this washing action. In most cases, a "tackifier" is added to the oil to provide greater resistance to the coolant. Many low-cost slideway oils do not contain this additive, so they may wash off the slideways easily when in service. Castrol's way lubricants are formulated with a tackiness agent to ensure resistance to coolant wash, delivering low oil usage and low wear rates. Figure 8. Three of Castrol's ISO 220 slideway oils versus the leading competitor ISO 220 in a coolant spray-off test. All three greatly outperform the competitor, demonstrating the capability to lower oil usage and increase way protection. R73

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES