Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 374 of 385

1 800 255 4417 www.castrol.com/GPS March 2017 Glossary of Terms Conradson Carbon Residue Test – Determines the percentage weight of carbonaceous residue when a sample is heated in an ASTM standard procedure. Carbon-forming properties of lubricating oils for use in applications such as air compressors can be an important factor in the choice of a suitable lubricant. In such applications, the formation of carbon deposits can be very troublesome. Copper Strip Corrosion – A measure of the activity of a lubricant towards copper or copper based alloys, typically measured by ASTM D-130 or ASTM D-4048. It is the chemical attack of copper surfaces as the result of oxidation or other chemical action. Acids or other corrosive agents cause it. Corrosion – The attrition or wearing away of a substance by acid or electrochemical action. D Demulsibility – The ability of an oil to separate from water, metal working fluids or process fluids where mixing can occur. Its measure usually details oils, water and emulsion in some scale related to a time factor. Demulsibility is sometimes expressed as the rate, in cubic centimeters per hour, or settling out of a fluid from an emulsion under specified conditions. Density – The mass of a unit volume of a material. It can be measured in several ways including ASTM D-1298 and its numerical value varies with the units used. Dermatitis – An inflammatory response of the skin due to exposure to certain chemicals which may be reversed when exposure ceases. Signs and symptoms vary greatly. Diester Oil – A synthetic lubricating liquid made from esters; also called ester oil. This is part of the ester family of fluids; other members include Polyol esters and Phosphate esters. DIN - Duetsche Industrie Norman - German equivalent of ASTM. DI Water – Deionized water. Water which has been treated to remove dissolved ionic salts (i.e. hardness ions) to purify it. DN Factor – (Also called speed factor.) Determined by multiplying the bearing pitch diameter dm (measured in mm), by the speed, N, of the journal (measure in RPM). Together with operating temperature, DN is used to help determine the appropriate oil viscosity for lubricating bearings. DN = dm (in mm) * N (in RPM) where dm = (I.D. + O.D.)/2 Dropping Point – The temperature at which grease passes from a semi-solid to a liquid state (actually when the thickener begins to release oil on heating). Dropping point helps to determine the maximum temperature at which a grease will lubricate and remain in a bearing without running out. Dynamic Viscosity – See Absolute Viscosity. E Elastohydrodynamic Lubrication – (EHD) Lubrication modified to take into consideration the elastic properties of the bearing material and the viscosity increase of the lubricant under concentrated load or pressure. Emulsifier – A chemical used to promote the emulsification of two liquids and to enhance the stability of the emulsion. Emulsion – A mechanical mixture of the two immiscibleliquids as oil and water. Water-in-oil emulsions have water as the non-continuous phase and oil as the continuous phase. Oil-in-water emulsions have water as the continuous and oil as the non-continuous phase. EP – Extreme Pressure. S3

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES