Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 61 of 385

1 800 255 4417 www.castrol.com/GPS March 2017 Metalworking Fluids Product Data Electrical Discharge Machining (EDM) Fluids Cutting and Grinding Neat Oils *Not all approvals are listed in this document. Approval types vary by company and may be plant-specific or related primarily to health and safety. Please contact Castrol for specific approval questions. Ilocut ® EDM 200 Description: Ilocut EDM 200 is a low viscosity, mineral oil-based, high performance electrical discharge machining (EDM) fluid designed to enable optimum rates of metal removal while achieving low electrode wear, good surface finish and fine tolerances. It is specially formulated to provide long fluid life and very low odor. Application: Recommended for use in electrical discharge machines of all sizes, on ferrous and non-ferrous metals. Very low odor to improve facility environment and long life due to additional anti-oxidants. Ilocut ® EDM 401 Description: Ilocut EDM 401 is an oil-based electrical discharge machining (EDM) fluid. The dielectric strength, low viscosity and high flash point of this fluid make it well suited for many EDM operations. Application: Recommended for use in electrical discharge machines of all sizes, on ferrous and non-ferrous metals; particularly suited for roughing operations where high rate of metal removal is required. Use in applications where petroleum odor is tolerable. Typical Properties Ilocut EDM 200 Appearance Clear, colorless Viscosity @40ºC 2.7 cSt Viscosity @100ºF 36 SUS Flashpoint 250°F (PMCC) Approvals* Ford, GE Typical Properties Ilocut EDM 401 Appearance Colorless Viscosity @40ºC 4.3 cSt Viscosity @100ºF 41 SUS Flashpoint 261°F (COC) Approvals* Makino EDM C 31

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES