Issue link: http://read.dmtmag.com/i/814629
Hydraulic, Turbine and Circulating Fluids 1 800 255 4417 www.castrol.com/GPS March 2017 Industrial Lubricants Product Data Fire-Resistant Hydraulic Fluids Anvol ® SWX Description: Anvol SWX grades are HFDU synthetic polyol ester hydraulic fluids as defined by ISO 6734/4 and ISO 12922 (1). They have been evaluated for fire hazard by Factory Mutual under Factory Global Standard 6930 and are officially "FM approved." Anvol SWX fluids are outstanding in their category in providing a safe working environment with superior system reliability and low tendency to form varnish or sludge. They separate readily from water and provide wear protection equivalent to that of mineral oils for gear, vane and piston pumps. Application: Formulated for use in hydraulic applications where there is high risk of fire such as hot strip mills, coil handling facilities, pipe mills and continuous casters. Formulated to work in high-pressure hydraulic systems up to 7500 psi. Fully compatible with nitrile (NBR), hydrogenated NBR and fluorocarbon rubbers (FKM). Biodegradable per OECD 301B. Approved by Factory Mutual. Anvol ® WG 46 Description: Anvol WG 46 is an HFC type water glycol fire-resistant hydraulic fluid that contains anti-wear additives and corrosion inhibitors. It provides excellent protection against rust and vapor phase corrosion. In hydraulic pump tests, Anvol WG 46 has shown high levels of anti-wear performance. Its foam resistance, low temperature flow, fluid stability and storage stability are also excellent. Anvol WG is dyed red for easy distinction from other fluids. Application: Designed for use in hydraulic systems where, in the event of leakage, there is a significant risk of ignition such as in furnace doors, die-cast machines, forging machinery and mining equipment. Rated for pressures up to 3000 PSI. Approved by Factory Mutual. Check PDS for elastomer and metal compatibility. Typical Characteristics Product Viscosity @ 40˚C VI Base Oil Additives Zinc Flash Pt (COC) Fire Pt Autoig- nition Pt Pour Pt Anvol SWX 46 46 cSt 180 Polyol Ester AW N >536˚F 680˚F 806˚F -33˚F Anvol SWX 68 68 cSt 180 Polyol Ester AW N >536˚F 680˚F 806˚F -27˚F Typical Characteristics Product Viscosity @ 40˚C VI Color Base Fluid Water Content Flash Pt (COC) Pour Pt Anvol WG 46 46 cSt >200 Red Water Glycol 39% None -60˚F H 15

