Issue link: http://read.dmtmag.com/i/814629
1 800 255 4417 www.castrol.com/GPS March 2017 Industrial Lubricants Product Data Specialty Greases Molub-Alloy 9030-1 Description: Molub-Alloy 9030-1 grease is a high viscosity, temperature stable grease with a unique polyurea thickening system that maintains a constant lubricating film in the presence of heat, heavy and shock loading, airborne contaminants and aggressive process water. It is formulated with oxidation and corrosion inhibitors to ensure long-term protection at elevated temperatures and when contaminated with corrosive process fluid. This allows for extended lubrication cycles in most applications. Molub-Alloy 9030-1 contains a blend of lubricating solids that provides additional protection to metal surfaces. Application: General plant lubrication of severe duty applications with slow speeds, high loads, elevated temperatures, shock loads and/or wet conditions. Remains pliable and pumpable even in lube lines exposed to high temperatures. Molub-Alloy BRB 572 Description: Molub-Alloy BRB 572 grease is formulated with premium petroleum base oils, rust and corrosion inhibitors and a lithium thickening system, and is fortified against oxidation for very long service life. The proprietary manufacturing technique creates a unique grease that has outstanding shear stability and controlled mobility under shear, allowing for bearings to be fully packed without creation of excess churn or heat. Molub-Alloy BRB 572 contains a special blend of lubricating solids to protect under high sliding conditions and heavy loads. Application: Precision ball and roller bearings as well as general applications, including journal bearings up to +250˚ F. Suitable for bearings where a larger than normal grease pack (60%) may be desirable for long-term lubrication and to seal out contaminants. Typical Characteristics Product Thickener Additives NLGI Base Oil Base Oil Vis. @ 40C Drop Point 4-Ball Weld 4-Ball Wear Load Wear Index Molub-Alloy 9030-1 Polyurea EP / Solids 1 Mineral ISO 460 544˚ F 400 kg 0.5 mm 120 kg Typical Characteristics Product Thickener Additives NLGI Base Oil Base Oil Vis. @ 40C Drop Point Roll Stability 4-Ball Wear FE-9 Bearing Life Test Molub-Alloy BRB 572 Lithium EP / Solids 2 Mineral ISO 150 >356˚ F 3 points change 0.52 mm Pass I 18

