Issue link: http://read.dmtmag.com/i/814629
Miscellaneous Lubricants Industrial Lubricants Product Data 1 800 255 4417 www.castrol.com/GPS March 2017 Miscellaneous Lubricants Tribol CM ATO 100 Description: Tribol CM ATO 100 is an oil designed specifically for service in pneumatically operated tools producing rotary and/or reciprocating motion. It has excellent anti-wear properties due to a combination of additives, including liquid moly. Tribol CM ATO 100 has a unique additive to tie up water in air lines, thus eliminating problematic rust that often occurs in humid months. This oil can be applied by an air line oiler, spray mist, oil cup, splash, central oiling or circulation system. Application: Pneumatic tools operating with rotary or reciprocating motion, especially where wet air, corrosion and tool wear are problematic. Typical applications are nutrunners, torque wrenches, screw drivers, drills, sanders, chippers and hammers. Molub-Alloy 491 C Description: Molub-Alloy 491 C is a specially designed lubricant for applications in heavy industry where high temperatures make the use of combustible or traditional lubricants impossible or extremely difficult. This lubricant is a high concentration of Molub-Alloy solid lubricants suspended in water, allowing even distribution over metal surfaces. These solid lubricants have a good affinity to metal surfaces and provide a strong lubricating film. Molub-Alloy 491 C is a concentrate that is designed to be mixed with water on-site. Application: Typical applications are found in aluminum die-casting and extrusion industries, glass bottle molds, rubber tire molds, cement kiln shell supporting pads and other applications requiring removal, disassembly or slow and intermittent movement of parts at temps in excess of 300° F. Dilute with water, typically at a ratio of 1:10, and then apply by spray, brush or other suitable means. Typical Characteristics Product Viscosity @ 40˚C Base Oil Additives Zinc Flash Pt (COC) Pour Pt 4-ball Wear Conradsen Carbon Tribol CM ATO 100 21 cSt Mineral AW / EP No 340˚ F -40˚ F 0.35 mm 0.03% Typical Characteristics Product Carrier Binder Additives Zinc Flash Pt (COC) Molub-Alloy 491 C Wa- ter Silicate Solids No None O 4

