Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 241 of 385

Technical Training and Reference Info Metalworking Technical Training Cutting and Grinding 1 800 255 4417 www.castrol.com/GPS March 2017 Functions of Metalworking Fluids Flushing and Chip Removal The accumulation of swarf, chips and dirt associated with machining operations must be flushed away from the cutting zone quickly to avoid risk of tool breakage or component damage. Cutting fluids have carefully selected properties such as oil concentration, viscosity and detergency to enable them to efficiently flush contaminants and keep all areas of the machine and system clean. These contaminants may need to be suspended long enough to flow through trenches and piping in order to get to the filter media. In other cases, quick settling may be preferred in systems relying on a chip drag system along the bottom of the sump. Figure 4. Flushing action of coolant is important in maintaining a clean working environment. Corrosion Protection MWFs come in contact with the workpiece, multiple areas of the machine tool and many components in the coolant filtration and delivery system. For this reason, the fluid must provide a good degree of corrosion protection for multiple metals and also protect from bimetallic corrosion, which can occur when two dissimilar metals are in contact. At the same time, the cutting fluid must also not react strongly to the variety of other materials within the system such as elastomers, plastics and paint. Figure 5. Result of a cast iron chip (CIC) test in the lab. Overall Benefits of Cutting Fluids Additional properties that should be provided by a good MWF include: • Long sump life • Low foam and air entrainment • High operator safety and acceptance • Meeting or exceeding environmental requirements • Resistance to biological activity • Rejection of tramp oil for easy skimming When chosen properly, a metalworking fluid will provide many benefits to the machining process: • Long tool life • Excellent surface finish • Increased production rates • Reduced scrap and rework • Clean machine and coolant system • Reduced downtime • Safe working environment • Reduced energy requirements • Corrosion-free machine and parts • Low total cost of ownership Polar molecules are used to form a coating on the metal and prevent the oxidation reaction from occurring. Cutting fluids are typically formulated only to provide short-term, in-process corrosion protection for the parts until they reach the next operation. For longer- term protection needs, a corrosion preventive fluid should be used. Q4

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES