Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Metalworking Technical Training Cutting and Grinding 1 800 255 4417 www.castrol.com/GPS March 2017 Machining Operations Drilling and Gundrilling A drill for cutting metal is a rotary-end cutting tool with one or more cutting lips and flutes for the passage of chips and the admission of cutting fluids. Drilling is usually the most efficient and economical method of cutting a hole in solid metal. Drills generally require sufficient coolant pressure or flow to lubricate the tool at the point-of-cut. A standard drill can only produce a quality hole with depth of about 5X its diameter. For holes deeper than that, deep-hole drilling is used. Gundrilling is the most common type of deep-hole drilling; it uses a crimped tube tool with cutter head or milled tool. Single flute is the most popular but two flute styles are also available. Coolant is delivered under high pressure through the tool to the point-of-cut to ensure it reaches deep into the hole and properly evacuates chips. Guide bushings are used to support the shank of the gundrill as it extends to prevent flexing and whipping. Figure 19. Single flute gundrills with coolant holes. Courtesy of Star Cutters. Type Description Standard Drilling The drill is twisted into the fixed work piece. Gundrilling Deep-hole drilling operation for large depth to diameter ratios (greater than 5X and up to 300X or more). Ejector Drilling Type of deep-hole drilling used for medium to large diameter holes. Uses a carbide drill head, outer tube and inner tube with coolant flush between the tubes. Threading and Tapping Threading is an operation used to develop external screw threads on the outer diameter of bolts and rods, and similar cylindrical workpiece features. This can be done with a single point tool, a multi-point threading tool or with form tools in thread rolling machines. Cut tapping and roll form tapping are common means to develop an internal thread from a drilled hole. Combining rotary motion with axial motion, the tapping tool cuts or forms the internal thread. Roll form tapping is much more difficult, as it does not actually remove metal, but simply deforms it. Tapping is one of the most difficult operations performed, as the contact surface for a tap is larger than most other cutting operations performed. Tapping, especially roll form tapping, requires a neat oil or water-based coolant with high lubrication value (high oil, boundary lubricant, and EP). Type Description Single Point Threading A single point tool produces a thread on a cylinder or cone. Cut and Roll Form Tapping A screw thread is cut into the work piece via the tool. Q14

