Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 253 of 385

Technical Training and Reference Info Metalworking Technical Training Cutting and Grinding 1 800 255 4417 www.castrol.com/GPS March 2017 Machining Operations Broaching Broaching is a machining process using a toothed tool to remove material. The teeth of the broach bar increase in size over its length, allowing for a single tool to machine the part in a single pass, instead of many tools and many passes. Broaching is a slow-speed process that generates low heat and requires good lubrication and chip flushing. Neat oils and water-based coolants with generous amounts of EP additives are preferred. Type Description External Broaching Used to shape the outside of a workpiece. Internal Broaching Used to shape the inside of a workpiece. Reaming Reaming is a machining process in which a rotary tool takes a light cut to improve the accuracy of a round hole and to reduce the roughness of the hole. Most reamers have two or more flutes parallel to the tool axis or in helix, which provide teeth for cutting grooves for chips. Simply put, reaming is an operation to make a hole rounder, straighter, and with better finish or critical size. Reaming removes only a small amount of material, typically 0.004" - 0.010" on the diameter. Lubrication is important to produce good surface finish, so neat oils and water-based coolants with good levels of boundary lubricant (fatty material) are preferred. Type Description Multi-Tooth Reaming Used to improve accuracy and surface finish of a round hole. Single Blade Reaming Used to make a slight enlargement in the workpiece for fine size adjustment. Q16

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES