Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Metalworking Technical Training Cleaners 1 800 255 4417 www.castrol.com/GPS March 2017 Washer Types As previously noted, industrial washers generally fall into two major category types: Immersion and Spray washers. There are various sub-types within each category, such as immersion washers with ultrasonic assist. In addition, maintenance washers can include various types of floor cleaning machines or high pressure "Hotsy"-type hand-held wand washers. Deburring washers are designed to remove metal burrs from finished workpieces. These can be ultra high-pressure spray washers or vibratory table using ceramic media flooded with alkaline wash fluids to flush away fines and provide short-term rust protection. Spray Washers Basic elements of spray washers include: • a cabinet • reservoir • pumps • plumbing • spray nozzles These elements are usually supplemented with heaters and filtration. Spray washer design includes the following variants: • Single or Multistage, Wash/Rinse, Wash/Rinse/RP, etc. • May share one reservoir or have separate tanks • High mechanical energy • Debur systems can run up to 10,000 psi • Cleaners with low-foaming tendency are usually required (especially high pressure washers) Immersion Washers Basic elements of immersion washers include: • Tank with pump • Workpiece platform • Usually supplemented with heaters and filtration • May have submerged nozzles • Platform may cycle up and down with vertical motion (Agi-lift type) Figure 6. Deburring spray washer with robotic spray arm (cabinet panels removed for detail). Courtesy of TBD. Figure 7. Spray washer with built-in conveyor. Courtesy of TBD. Figure 8. Multistage immersion washer. Courtesy of TBD. Additional aspects of immersion washers may include the following: • Design can be single or multistage, with multiple tanks • Generally designed with low mechanical energy • Cleaner chemistries with detergency and foaming tendency are most successful Q31

