Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 278 of 385

Corrosion Preventives Technical Training and Reference Info Metalworking Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Corrosion Preventive Types Synthetic Type Water-based synthetic rust preventives have several common traits with synthetic metalworking fluids. They use amine-based buffering chemistry to keep the pH high, which helps impart bio-resistance and promote rust protection. Synthetic rust preventives are excellent for in-process protection and allow the part to have absolute dry-to-touch protection once the water evaporates. This protection is provided by passivating chemistry, which has affinity for the metal workpiece surface. However, it needs to be kept dry for maximum effectiveness. Unlike solvent-based and neat oil rust preventives, this film provides no physical barrier; as a result, its effectiveness cannot be benchmarked easily using humidity cabinet tests. One to two week indoor protection is typical, and where the environment is well controlled, 30 to 60 days is possible if applied at higher concentration (10+%). Note: Humid storage conditions with frequent temperature changes will shorten the protection period. Emulsion Type Two types of emulsion water-based rust preventives are common. One type utilizes a loose emulsion chemistry which imparts the opportunity for a fairly heavy oil film to be deposited on the workpiece. This type of film can provide eight to twelve months of protection at higher concentrations (up to 20%). The loose oil emulsion can be enhanced by applying it with a heated dip tank. This is commonly done with parts that have been treated with a black oxide film. A second type of emulsion rust preventive is a micro-emulsion based chemistry, which causes the oil droplets to be much smaller than in a fluid with loose emulsion characteristics. This will result in a much lighter film of oil. In addition, this type of inhibitor shares some of the rust protection-promoting chemistry of a synthetic water-based rust preventive. Micro-emulsion rust preventive fluids will offer improved bio-resistance over loose emulsion rust preventives, so there will be less chance of odors and the operating reservoirs can remain in use for longer intervals. Both of these emulsion product types share the polar ionic affinity for metal due to the emulsion chemistry, so the oil content of the fluid will readily coat the parts. Overall, water-based rust preventives can be monitored and controlled in a fashion similar to water-based metal removal fluids, with concentration, pH and other checks being routinely performed. Water-based rust preventive advantages: • No flash point in solution (reduced fire hazard) • Low VOCs • Eliminates fire risk • Improves the overall working environment • Low in-use cost when diluted with water • Most types are easy to remove • Synthetic types can be used in washers to clean, rinse and protect Thixotropic Corrosion Preventives Thixotropic types are specially formulated oil/solvent/wax blends that permit an application of a heavy protective film to provide significant outdoor protection. They utilize a wax suspension that provides a self-healing film. If the protected workpiece or equipment has a portion of the protected film scraped or rubbed in some fashion, the residual film near the disrupted area will flow into the void and re-establish a protective film. This type of inhibitor has a unique consistency, somewhat like a grease in that it has a high thickness and resists flowing readily. However, when shaken or stirred, it liquefies and will flow for easier application. Thixotropic rust preventives can be sprayed onto work- pieces using special pump and spray wand combinations similar to those developed for undercoating; or, a heated tank can be used to dip parts. It is readily removed by a high-pressure spray washer. Due to its excellent salt spray performance, this type of rust preventive is well suited for protecting ocean transported cargo. It can replace more difficult-to-use and difficult-to-remove asphaltic film inhibitors. Q41

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES