Issue link: http://read.dmtmag.com/i/814629
Corrosion Preventives Technical Training and Reference Info Metalworking Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Application Methods Roller/Brush Method The advantages of the roller/brush method are: • It may avoid or eliminate the need for special equipment • Heavy film inhibitors are more easily applied in this manner This method also has certain disadvantages: • Labor intensive if done by hand • Poor coverage potential due to uneven application or operator error • May introduce contaminants • Protection varies For effective use of corrosion preventives, remember: • Rust preventives are most effective if applied to clean, rust-free parts — Rust preventives do not stop pre-existing rust • Typically, solvent-based inhibitors are used when dewatering is desired • Dip tank applications using dewatering fluids require the tank to be drained or decanted to remove accumulated water in order to prolong fluid life • Non-dewatering oil-based rust preventives should be applied only to dry parts Length of Protection Often, it is requested that a process use a rust preventive fluid with twelve months of protection, including shipment via truck over several days any time of the year, and yet have no perceptible film and pass a humidity cabinet test. This is more complicated than it may appear, given the variables that affect the length of protection. Two major factors that determine length of protection are: • The degree of protection applied to the workpiece by the corrosion preventive and application process • The environment into which the workpiece is placed Much has been discussed about film types and film thicknesses to this point. It has also been stressed that surface preparation (e.g., washing, rinsing) prior to the rust preventive being applied is important. The environment should be controlled as much as possible, recognizing that poor storage and transportation conditions cannot be overcome by the corrosion inhibitor. Packaging, humidity, weather, dust and contaminants will all play a role in true length of protection. Published protection times for corrosion preventives assume the environment to be reasonably good. However, how can the degree of protection of the corrosion inhibitor be benchmarked and compared? How can we predict with some certainty that we will use the correct inhibitor? Lab Testing Two tests are used commonly to benchmark protection in the lab: • Humidity cabinet testing — ASTM D1748 using polished cold rolled-steel panels — ASTM D2247-68 using polished cold rolled-steel panels — Protection is measured in days with no rust • Salt spray testing — ASTM B117 test method using polished cold rolled-steel panels — Protection measured in hours with no rust Q43

