Issue link: http://read.dmtmag.com/i/814629
Corrosion Preventives Technical Training and Reference Info Metalworking Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Length of Protection Short-Term Protection Rust preventive fluids that target short-term or in-process protection typically have a very light film, from imperceptible to a slightly waxy or greasy film. Often, a water-based synthetic or emulsion product will be suitable for such applications, especially if in-process is being sought. Finished parts that need final protection until assembly or shipping may need more effective protection, such as that provided by a solvent-based, water-displacing fluid. If there are challenging storage conditions or if parts may be handled during the manufacturing process, consider inhibitors that resist acid fumes or have fingerprint suppression. Consult the product data sheet for information regarding special properties and film characteristics and thickness to be confident the correct fluid is being selected. Medium- to Long-Term Protection (Indoors) Parts that are being stored for medium- to long-term periods (over six months and up to several years) will need more robust rust protection. Often, these conditions are met by using oil-based or solvent-based rust preventives with heavier film thicknesses. Enhanced packaging may be necessary to gain the rust-free security being sought if the protection requirement is longer than 12 months. For example, oil-based rust preventives with VCI chemistry will give excellent multi-year protection, if combined with the use of sealed packaging. The vapor phase chemical inhibitors create a moisture-free atmosphere within the packaging and block moisture from reaching the oil film on the part. Finished bearing sets are an example of applications that use this type of protection and packaging. More conventional oil-based rust preventives can be used in similar packaging if VCI impregnated paper or VCI polyethylene bags are used. If sealed packaging isn't practical due to part size or configuration, thixotropic-type inhibitors or heavy asphaltic films can be considered, but this is not common for indoor applications. Outdoor Protection Outdoor protection is the most challenging corrosion preventive application, especially for near shore storage or trans ocean marine shipping. Usually it is expected that some supplemental protection will be employed, such as tarpaulin covering, shed/roof covering, or ocean container, but that may not always be the case. Rain and snow, as well as large temperature changes in humid conditions will challenge all but the best rust preven- tives. The asphaltic or thixotropic wax coatings are the best options to target success for these conditions. They are generally applied by special sprayers, heated dip, or brushed on by hand. Heavy grease can be used, but grease may be washed away after extended service. Of course, the most severe condition protection is provided by a true permanent or semi-permanent coating such as painting or plating. Q45

