Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 306 of 385

Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Fundamentals of Lubrication Lubricant Characteristics and Additives Corrosion Resistance Resistance to rust, corrosion and chemical attack is an important characteristic for most oils to have. Given foreseen and unforeseen conditions, corrosion inhibitors are commonly added to most industrial oils to ensure that they provide this protection. Protection of both ferrous components (containing iron) and copper-based metals ensures that a variety of equipment will not sustain corrosive wear. Several lab tests are available to measure corrosion resistance, including: • Copper Corrosion — Copper strip is immersed in the oil — The degree of corrosion over a given time period is measured from 1a (no corrosion) to 4c (heavy corrosion), as shown in Figure 36 — Most industrial lubricating oils are formulated to achieve a 1b or better rating — Oils with aggressive additives, such as active sulfur, will be a 4c and not suitable for contact with yellow metals • Rust Test (ASTM D 665 A & B) — Steel test rod is placed in oil with 10% water at 140˚F for 24 hours — Pass/Fail test – any corrosion causes a "fail" — Test A uses distilled water — Test B uses salt water • Emcor Rust Test for Grease — Bearings are immersed partially in water and operated for one week in a predetermined sequence of running (at 80 RPM) and stopping — At the end of the test, the raceway of the outer ring is inspected for rust — Ratings are 0 (no corrosion) to 4 (heavy corrosion) • Corrosion Properties of Grease (ASTM D 1743) — Tapered roller bearings are packed with grease — Bearings are exposed to water and stored for 48 hours in 100% humidity — Failure is determined by any corrosion spot 1 mm or larger Figure 36. Copper corrosion test scale. Copper Strip Corrosion Standards Plaque © ASTM Corrosion inhibitors work in two main ways: 1) neutralize any acids present, and/or 2) form a protective layer on the metal surface to prevent contact with water and acids (Figure 37). Figure 37. Corrosion inhibitors providing protective film to metal surface. Barrier Protection H 2 O O 2 H 2 O Protective Film Surface Reaction H 2 O O 2 H 2 O Passivating Protection R20

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES