Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Greases and Bearings Grease Basics What is grease? Basically grease is an oil that has been thickened to allow it to stay in place. Grease is comprised of a combination of oil, additives and thickener (Figure 1). The base oil represents 80-95% of a grease. Since a grease's major component is oil, most characteristics that are typical of oils also apply to grease. For example, it is important to know the base oil viscosity before choosing a grease for a particular application. The thickener does impart certain characteristics to the finished grease, but the oil and additives provide the majority of the lubricating properties. Figure 1. Components of a grease. BASE FLUID Mineral Oil Synthetic Oil 80-95% of the grease ADDITIVES Oxidation Inhibitor Corrosion Inhibitor EP/AW + + THICKENER Soap Non-Soap Functions of a Grease The main functions of a lubricant as described in the Fundamentals of Lubrication also apply to grease: • Reduce friction • Control wear • Prevent corrosion • Seal out contaminants • Dampen shock Fundamentally, oils make better lubricants because they don't have the thickener "getting in the way." But greases serve additional functions beyond an oil to help satisfy various lubrication requirements. For example, greases: • Work in high contamination environments such as — Areas with water spray, which would easily wash away an oil — Places with high dust, like a cement mill • Reduce high oil consumption and waste • Simplify housing design • Are effective where oils run or drip out • Resist centrifugal forces such as in high speed couplings • Are successful where high loads squeeze out an oil • Are useful for hard-to-reach applications Figure 2. Main types of grease thickeners. • Account for about 90% of all grease • Alkali metal react with a fatty acid • Major types include: –Lithium/Lithium Complex –Calcium/Calcium Complex –Sodium –Aluminum/Alum Complex Metallic Soaps Non Soaps • Account for about 10% of all grease • Various materials may be used • Major types include: –Polyurea –Bentone (clay) –Fumed silica –Carbon black Note: The complex version of a soap has a higher useful temperature range as compared to the non-complex version. Grease Thickeners Greases can be formulated using a variety of thickeners, but these are broken into two major categories: Soap and Non-Soap (Figure 2). Soaps, often referred to as metallic soaps, account for most of the grease production (~90%). They are formed by reacting a fatty acid or fatty ester with an alkaline earth metal (such as lithium, calcium, sodium or aluminum) with the application of heat, pressure and/ or agitation. The most common non-soap greases are polyurea and clay. R54

