Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Slideway Oils Background on Slideways Purpose of Slideways Slideways are found primarily on cutting and grinding machines such as CNCs, broaches, drills, hones, grinders, lathes, mills, saws and shapers. They support the load of the table and are designed to provide smooth, controlled motion. Slideways allow precise control of the table's position and motion, and act as a "channel" to direct cutting forces away from the cutting zone. In addition, they provide rigidity, dynamic stiffness and vibration resistance to the machine. Figure 1. Typical plain slideway locations (indicated by the red areas) supporting the table load and allowing for precise control of position and motion. Types and Designs of Slideways Support and movement of the tables and spindles may be accomplished by several types of slideways: • Rolling element linear ways • Hydrostatic ways • Plain ways Rolling element linear ways, a.k.a. linear guides (Figure 2), use a set of balls or rollers that move in a track to support the load. They can be considered to be very similar to an anti-friction bearing, but they work in a linear fashion rather than a rotary one. Linear guides may be lubricated by oil or grease and may not specifically require a slideway oil. Figure 2. Linear guides supporting a table. The steel balls run through a metal track to allow smooth movement and good load support. Image courtesy of THK. Hydrostatic ways use a closed-loop, pressurized oil system to provide a cushion of oil between a truck and guide. This system creates a more constant oil film under varying loads and allows for excellent vibration dampening and minimal wear. Typically, hydrostatic ways call for an R&O or AW circulating oil and often do not specifically require a slideway oil. Figure 3. Basic diagram of a hydrostatic way support system. Image courtesy of Hardinge Inc. R70

