Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 377 of 385

1 800 255 4417 www.castrol.com/GPS March 2017 Glossary of Terms K Kinematic Viscosity – Measured by rate of flow through capillary tubes which permit highly accurate measurement. Measured in mm2/sec, also known as centistokes, kinematic viscosity has worldwide application and is measured at standard Fahrenheit and Celsius temperatures. L Load Wear Index (LWI) – See Four-Ball Test; a measure of the relative ability of a lubricant to prevent wear under applied loads. This value is expressed in units of kilogram force (kgf) and is calculated from the loads applied and corrected for elastic deformation of the balls under static loading and for the size of the wear scar. Formerly called Mean Hertz Load. Lubricant – Any material or substance interposed be- tween two surfaces in relative motion for the purpose of reducing the friction, carrying away heat and contaminants between them. Lubricity – A moderate load-carrying ability above anticipated service capacity indicated by viscosity. Lubricity can be enhanced by additives or compounding. M Metal Deactivator – An additive used in lubricants and fuels that converts into an inactive form, the traces of metal (such as copper in fuels or component parts) and metal surfaces (such as copper in gear, bearing and other components). This trace material, in the absence of the deactivator, would catalyze gum formation and other oxidation. MFT – Micro Flux Trans is a patented proprietary additive system that provides superior friction reduction and surface improvement characteristics that works without sacrificing component surfaces. Sometimes referred to as Plastic Deformation technology. Mineral Oil – Oils derived from a mineral source, such as petroleum crude oil, as opposed to oils derived from plants and animals. Multigrade Oil – API specifications that define perfor- mance at 2 different operating conditions such as 0°C and 100°C, typically for crankcase and gear oils. An oil that meets the low temperature viscosity limits of one of the SAE "W" numbers as well as the 100°C viscosity limits of one of the non-winter grades. N Naphthenic Base Oils – A characterization of certain petroleum products prepared from Naphthenic type crudes (crudes containing high percentage of ring type hydrocarbon molecules as opposed to linear or branched molecules). Neutralization Number – Sometimes called "Neut Number" or Acid Number, ASTM D-664 or ASTM D-974, is a term still used in the petroleum industry, but rapidly becoming obsolete in the lubrication field. See Total Acid Number. Neutral Oil – Light overhead cuts of lubricants stocks. Neutral oils are the basis for most commonly used automotive lubricants and resemble Paraffinic oils in basic properties. NLGI – Formerly called National Lubricating Grease Institute. Professional association of companies manufacturing or marketing all types of lubricating greases, suppliers of such companies, and technical and educational organizations. Promotes research and testing for the development of better lubricating greases and better grease lubrication engineering service to industry, collects, and disseminates technical data, and conducts forums. S6

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES