Issue link: http://read.dmtmag.com/i/814629
1 800 255 4417 www.castrol.com/GPS March 2017 Glossary of Terms T Tackifier – an extremely sticky polymer based additive, added to slideway oils and other lubricants so they stick physically to surfaces TGOA – Tribol Gear Oil Additive is a patented proprietary additive system that provides superior friction reduction and surface improvement characteristics that works without sacrificing component surfaces. Sometimes referred to as Plastic Deformation technology. Timken EP Test (Timken OK Load Test) – This test is made with a steel test cup (ring) rotating against a loaded steel block and lubricated by the test fluid. Ten minute tests are run at increasing loads (5 lbs. increment) until the maximum load is obtained with no visual evidence of welding or seizing. TOST – Turbine Oil Oxidation Stability Test, ASTM D-943, used on turbine, hydraulic, and other circulating oils to determine oxidation resistance in number of hours. Total Acid Number (TAN) – The quantity of base, expressed in terms of the equivalent number of milligrams of potassium hydroxide (KOH), that is required to titrate the strong base constituents present in 1g of sample (ASTM Method D 664 or D 974). Total Base Number (TBN) – This is a "back-titration" used to measure the reserve alkalinity in fluids, such as diesel engine oils. The quantity of base, expressed in terms of the equivalent number of milligrams of potassium hydroxide, which is required to titrate the strong base constituents present in 1g of sample (ASTM Method D 664 or D 974). Tramp Oil – Unwanted oil that becomes mixed with metalworking fluids, such as hydraulic and slideway oil. V Viscosity – Measure of a liquid's resistance to flow at specified temperatures. Viscosity Grade – Any of a number of systems that characterize lubricants according to viscosity for particular applications, such as industrial oils, gear oils, automotive engine oils, automotive gear oils, and aircraft piston engine oils. ISO grades are most common in industrial applications (i.e. ISO 32, 46, 68, 100, 150, 220, 320, 460, 680, etc.). Viscosity Index (VI) – A measure of the viscosity- temperature characteristics of an oil, indicating the rate at which the viscosity of the oil will change as temperature increases or decreases. Viscosity index does not necessarily indicate the quality of an oil. In general, viscosity index is only significant where large temperature variations are encountered. Viscosity Index Improver – Additive that increases lubricant viscosity index, usually required for formulation of multi-grade engine oils and other lubricants designed for wide temp ranges. VOC – Volatile Organic Compound. A carbon containing substance that evaporates. The VOC value of a chemical indicates the degree of chemical evaporation to the atmosphere. W White Oils – Light-colored and usually highly refined mineral oils usually employed in medicinal and pharmaceutical preparations, and as a base for creams, salves, and ointments, but also used as lubricants mostly in food grade products. Typically defined by USP (United States Pharmacopeia) standards and are used in food-grade formulations. S9

