Issue link: http://read.dmtmag.com/i/814629
Corrosion Preventives 1 800 255 4417 www.castrol.com/GPS March 2017 Metalworking Fluids Product Data Solvent-Based *Assumes primary protection from the elements via tarp or other cover **Not all approvals are listed in this document. Approval types vary by company and may be plant-specific or related primarily to health and safety. Please contact Castrol for specific approval questions. Rustilo ® DW 330 Description: Rustilo DW 330 is a solvent-based corrosion preventive with good dewatering properties, generating a heavy film to provide very long-term indoor and outdoor rust protection. After solvent evaporation, this fluid leaves a firm greasy protective film to give maximum defense against corrosion. Application: Use where the following are needed: very long-term indoor corrosion prevention, long-term outdoor protection, water-displacement, fingerprint suppression, heavy protective film, and/or protection in acid atmosphere. Excellent for protecting machine tools and other components for long-term storage or transportation. Rustilo ® DW 4130 Description: Rustilo DW 4130 is a soft film, solvent-based corrosion preventive and dewatering fluid formulated to give excellent long-term indoor protection. It offers a flash point higher than most comparable fluids while maintaining a reasonable drying time. Rustilo DW 4130 has good dewatering properties to remove free-standing coolants and cleaners from finished parts. Application: Use where the following are needed: long-term indoor corrosion prevention, short-term outdoor protection, high flash point, water-displacement, fingerprint suppression and/or protection in acid atmosphere Rustilo ® DWX 30 Description: Rustilo DWX 30 is a solvent-based corrosion preventive with excellent dewatering properties. After evaporation of the solvent, it leaves an ultra-thin greasy protective film providing good indoor protection. The fast drying time allows protected parts to be ready very quickly, while the rapid demulsibility permits excess water to fully separate in the tank for draining. Application: Use where the following are needed: medium-term indoor corrosion prevention, short-term outdoor protection, fast drying time, water-displacement and/or fingerprint suppression Typical Properties Rustilo DW 330 Flash point 144°F (PMCC) Film type Firm, greasy Indoor protection 24 months Outdoor protection* 12 months Drying time @ 20°C 120 min Approvals** Cummins, Honda Typical Properties Rustilo DW 4130 Flash point 180°F (COC) Film type Oily /greasy Indoor protection 18 months Outdoor protection* 3-6 months Drying time @ 20°C 75 min Approvals** Cummins, Honda Typical Properties Rustilo DWX 30 Flash point 106°F (PMCC) Film type Ultra-thin, greasy Indoor protection 8-12 months Outdoor protection* 3-6 months Drying time @ 20°C 30 min Approvals** Honda E 5

