April 2017 | EquipmentWorld.com
72
landclearing attachments
|
continued
Cut though rough-cut
dense brush
Designed to cut through rough-cut dense
brush, Virnig's V50 rotary brush cutter
clears trees up to 6 inches in diameter. The
three-way cutting system, mounted to a
flywheel, ensures the flywheel bounces off
stumps rather than catching and damag-
ing components. The 1/4-inch reinforced
mower deck is made from Grade 50 steel.
Attaching to skid steers, the attachment
uses standard dual hydraulic pressure relief
valves with dynamic breaking that stops
the 275-pound flywheel in under 10 sec-
onds. Double-sided 5/8- by 5-inch blades
can be flipped over to use a second set of
sharpened edges. The cutter is available in
60- to 78-inch cut widths, with a recom-
mended flow rate of 14 to 42 gpm.
Remove
unwanted
debris
Doosan offers
hydraulic clamps for
crawler and wheel
excavators that allow
users to precisely pick
and place material
or remove unwanted
debris for landclear-
ing applications. The
clamp edges keep ob-
jects secure for loading
and material handling.
Easily installed on the
excavator dipper, the
clamp has a heavy
duty cylinder and a
load holding valve that
helps prevent spillage.
The base plate may
be welded on without
removing the main
pin. The clamps can be
used with the Doosan
DX140LC-5 through
DX300LC-5 crawler
excavators and the
DX140W-5 through
DX210W-5 wheel
excavators.
