Issue link: http://read.dmtmag.com/i/826899
86 • JUNE 2017 • WORLD FENCE NEWS OSHA issues guidelines on forklift operator safety continued from page 14 FEATURES AND BENEFITS • Fast, simple installation which allows you to move to the next project quickly and more cost-effectively • Cuts lost revenue • Increases profits • 3 1/2" x 5" wire mesh • Eight wire colors and nine slat colors to choose from 1 . 8 0 0 . 5 7 4 . 1 0 7 6 • w w w . e p r i v a c y l i n k . c o m Leading the way with "Factory Inserted Slats"™ PrivacyLink ® PrivacyLink ® is the original and our most popular chain link fence with "Factory Inserted Slats"™ and has been ever since we invented it more than 20 years ago. Its rugged wire mesh plus durable double-wall slats provide unmatched privacy and security to most every commercial or industrial property. Chain link fence with "Factory Inserted Slats"™ Visit our website for more information or call now for a FREE 2017 full product catalog! reveals a deficiency, assignment to a different type of forklift, or a work- place condition change that would af- fect forklift operations. Certification The employer must certify that every forklift operator has received appropriate training, has been evalu- ated and has demonstrated competen- cy in performing the operator's duties. The name of the trainee, date of training and signature of the designat- ed evaluator will be included in the certification. Safe forklift operation rules • Only authorized, trained person- nel shall operate lift trucks. • Before start of shift, a visual in- spection must be made to ensure that horn, lights, brakes, tires, gas supply, hydraulic lines, etc. are in safe work- ing condition. Employees shall not operate an unsafe forklift at any time. • Fill fuel tanks outdoors while engine is off. • Do not exceed the safe load ca- pacity of a forklift at any time. Do not counterweight a forklift to increase lifting capacity. • Operators shall drive with both hands on the steering wheel. Horse- play is prohibited. Do not drive with wet or greasy hands. • No person shall ride as a passen- ger on a forklift or on the load being carried. • A forklift will not be used to el- evate a platform or pallet with persons on it, except work platforms especial- ly designed for this purpose. • No person shall stand or walk under elevated forks. • Operators should avoid making jerky starts, quick turns, or sudden stops. Do not use reverse as a brake. • Forklifts should be driven on the right side of the road or aisle-way. • Forklift operators shall cross railroad tracks diagonally whenever possible. • Forklifts shall be operated at a safe speed with due regard for traffic and conditions. Maximum speed lim- its: inside buildings, 5 mph; outside buildings in work areas, 7 mph; on roads, 10 mph. • Slow down on wet and slippery surfaces and at cross aisles or loca- tions where vision is obstructed. • Operators entering a building or nearing a blind corner shall make their approach at reduced speed. Sound horn and proceed carefully. • Standard arm signals will be used at all times. • Operators shall give pedestrians the right-of-way at all times. • Operators shall not drive toward any person who is in front of a fixed object or wall. • Operators shall not overtake and pass another forklift traveling in the same direction, at intersections, blind spots, or hazardous locations. • Operators should not put their fingers, arms, or legs between the up- rights of the mast, or beyond the con- tour of the forklift. • When the forklift is not carrying a load, the operator shall travel with the forks as low as possible (maxi- mum of 3 inches on paved surfaces). When carrying a load, it should be carried as low as possible (consis- tent with safe operation, 2 to 6 inches above the surface.) • Forks should always be placed under the load as far as possible. Do not lift a load with one fork. • No load should be moved unless it is absolutely safe and secure. • The operator's view should not be obstructed by the load. In the event of a high load, the forklift will be driven backward. • Operators shall look in the di- rection of travel. • The forks should not be operated while the forklift is traveling. • On a downgrade, the load shall be last, and the forks raised only enough to clear the surface. • On an upgrade, the load shall be first, and the forks raised only enough to clear the surface. • Use extra care when handling long lengths of bar stock, pipe, or oth- er materials. • Compressed gas cylinders shall be moved only in special pallets de- signed for this purpose. • When unloading trucks or trail- ers, the brakes on the vehicle will be set (locked) and the wheels chocked. • Forklifts must be safely parked when not in use. The controls shall be neutralized, power shut off, brakes set, key removed, and the forks left in a down position flat on the surface, and not obstructing walkways or aisles. • A forklift shall not be left on an incline unless it is safely parked and the wheels blocked.