10-S Tennis Supply

Fall/Winter 2017 Catalog

Issue link: http://read.dmtmag.com/i/859300

Contents of this Issue

Navigation

Page 57 of 59

What "Class" of lighting does your facility need? The American Sports Builders Association (ASBA) segments tennis facilities into four lighting "classi cations," based on the Average Maintained Footcandles, Minimum Maintained Footcandles and the Maximum Uniformity Ratio provided by the lighting system. Class I facilities generally require lighting to support broadcast television productions and have permanent seating. Class II facilities require lighting to support outdoor tournament play (collegiate/club/ recreational/residential) without television requirements. Class III facilities require lighting to support typical, non-tournament night play (collegiate/club/ recreational/residential). Class IV facilities require lighting to support low level recreational play. How much power will you need for your new lighting system? The power required to support your new lighting system is driven by the number and type of xtures required and the voltage. Most lighting systems can be con gured to adapt to all major voltages, including 120V/208V/240V/277V/480V. The voltage available will determine the amps required for the system. How many poles and xtures will we need? The number of poles, xtures and watts required are completely driven by the "Class" of lighting that is desired. "Class" is driven by both the amount of light on the court and the uniformity of light on the court. The amount of light on the court is driven by the number of xtures and the watts provided per xture. It is important to note that more than one xture can be mounted per pole and some xtures contain one 1000W bulb while others contain two 1000W bulbs. Typically the more xtures = more light and more poles = better uniformity. We can provide a variety of di erent layouts with various pole, mounting height and xture con gurations to accommodate your requirements. What type of poles will I need? Light poles come in a variety of di erent gauges and materials. The appropriate light pole for your application is usually driven by local building codes and wind load requirements. Facilities in coastal, hurricane-prone areas require stronger poles and foundations than those located in interior areas. Galvanized or aluminum poles are also an option for coastal areas where rust may be a factor. How do I get my lighting project started? Give 10-S Tennis Supply a call at 800-247-3907. We will provide you the expert guidance to help you nd the right lighting system for your facility. LIGHTING CONSIDERATIONS Tennis facilities can be greatly improved through the addition of low pro le, environmental lighting systems. These lighting systems provide exceptional lighting and minimal light spillage and pollution. We o er a variety of environmental lighting packages from leading manufacturers, including Techlight, Recreational Lighting Systems (RLS) and LSI Sports Lighting. We o er turn-key pricing, including materials, shipping and structural engineering. Our sister company, Fast-Dry Courts, Inc., can also install new lighting systems throughout Florida and the Caribbean. SPORTS LIGHTING 10-S.com • 58 • 800-247-3907 Metal Halide 1000W Light Bulb 1000 watt metal halide replacement bulb. Compatible with all 1000W xtures. #6S1003 $49.00 Buy 6+ & save! $45.00 each

Articles in this issue

Links on this page

Archives of this issue

view archives of 10-S Tennis Supply - Fall/Winter 2017 Catalog