Castrol GPS

GUIDE TO HEAVY DUTY PRODUCTS AND SERVICES-AUGUST 2025

Issue link: http://read.dmtmag.com/i/859318

Contents of this Issue

Navigation

Page 98 of 211

Transmission Fluids Background & Properties castrol.com/GPS 800 255 4417 May 2025 GPS Important Transmission Fluid Properties Viscosity index (VI), or the measure of change in an oil's viscosity relative to a change in temperature, is another critical factor in base oil and finished lubricant performance. Transmission fluids undergo fluctuations in temperature and are responsible for removing heat from the system. Base oils with high VIs (over 100) experience less change in viscosity related to temperature. In addition to stay-in-grade performance, high VI base oils offer excellent pumpability and lower oil consumption. An exceptional additive package is just as important as a high quality base oil. Differing friction characteristics of transmission clutch surfaces require a delicate balance of friction modifiers and other additives. Additives typically found in a premium-performing transmission fluid are: • Dispersants for sludge and varnish control; • Anti-oxidants to control oil thickening and breakdown; • Anti-wear agents to protect planetary gears, bushings, thrust washers, sprags and pumps; • Seal swell agents to control swelling, hardness and tensile strength of elastomers; • Corrosion inhibitors to prevent corrosion of bushings and thrust washers; • VI improvers to minimize viscosity change due to temperature and control sludge and varnish; and • Friction modifiers to help clutch plate/band friction engage properly and promote smooth shis. Hydrostatic Transmission Fluids (HTFs) HTFs are charged with protecting not only the transmission and final drives but the wet brake system as well. On the transmission side, HTFs have a higher coefficient of friction to handle heavy loads, but some friction modifier has been added to the fluid to prevent squawk and shudder in the wet brake systems. HTFs have a low static coefficient of friction because the fluids must have some slippery characteristics in order to protect the wet brake system. e chart illustrates this fact. Hydrostatic Transmission Fluids Sliding Speed Decreasing Torque, Nm D3 Very Low Static Friction ► ecastrof

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO HEAVY DUTY PRODUCTS AND SERVICES-AUGUST 2025