Issue link: http://read.dmtmag.com/i/859318
Hydraulic Fluids Product Data castrol.com/GPS 800 255 4417 May 2025 GPS Castrol ® Anvol ® SWX 46 Property Method Units Anvol SWX 46 Appearance Visual Clear & Bright Kinematic Viscosity at 40°C ASTM D445 mmÇ/s 48.4 Kinematic Viscosity at 100°C ASTM D445 mmÇ/s 9.56 Viscosity Index ASTM D2270 180 Pour Point ASTM D97 °C -36 Relative Density at 15°C ASTM D4052 g/ml 0.89 Flash Point, COC ASTM D92 °C 280 Fire Point, COC ASTM D92 °C 360 Autoignition Temperature ASTM E659 °C 430 Total Acid Number (Potentiometric) ASTM D664 mg KOH/g 1.3 Foam Sequence I, Tendency ASTM D892 ml 10 Foam Sequence I, Stability ASTM D892 ml 0 Copper Corrosion, 3hrs at 100°C ASTM D130 1A Rust Test, Procedure B ASTM D665B Pass RPVOT ASTM D2272 mins 230 FZG Gear Failure Load Stage (A/8.3/90) DIN 51354 >12 Air Release to 0.2%volume at 50°C IP 313 mins 2 Health and Safety Castrol Anvol SWX 46 is classified as non-hazardous and presents no significant risks to operators. However, it is good safety procedure to minimize skin contact and inhalation of oil mist. Storage To ensure that your product reaches your hydraulic system in excellent condition, it is important to store your drums of product correctly. Where practical, place drums under cover out of direct contact with sunlight and weather. Store the drums on their side or use a drum cover to prevent water contacting the drum bung. When decanting product from the drum, ensure that the bung area is cleaned with a lint free cloth before transfer. All reasonable care has been taken to ensure that this information is accurate as of the date of printing. Nevertheless, such information may be affected by changes in the blend formulation occurring subsequent to the date of printing. Material Safety Data Sheets are available for all Castrol products. e MSDS must be consulted for appropriate information regarding storage, safe handling and disposal of product. C32 ecastrof