Issue link: https://read.dmtmag.com/i/110301
��� MARCH 2013 ��� WORLD FENCE NEWS GLOBAL HARDWARE SYSTEMS, INC. Manufacturers & Wholesalers FASTENER CAPS Fence Fittings ��� Barbed Wire ��� Bolts & Nuts for the fence industry Established 1984 ALL TYPES Snap-Caps, Tap Caps, Kappets, Hex-Caps, Hinge Caps All colors and sizes available in small or large quantities Fence ordinances from around the U.S. As part of an ongoing and longstanding series, World Fence News offers this ���snapshot��� of building ordinances which affect fence installations from municipalities across the United States and Canada. This information was taken from official sources, but you should always consult the appropriate building departments where you plan to work for specific requirements. Easy to order through PRO-DEC.COM Check us out! Frederick, Maryland ��� Dallas, Texas 301-696-1416 ��� Fax 301-696-1417 1-800-330-1845 City of Geneva, Illinois A building permit is required prior to installing or replacing a fence. Basic requirements include: ��� No fence or wall shall be erected SWAN-BOND Fused-Bonded Wire COMPARE AND SAVE ON TEMPORARY FENCE PANELS N LI N C AI N H E 600 W. Manville St., Compton, CA 90220 FE M AN TE U U FA IT C ST TU ER IN R S �� 800-688-SWAN (7926) www.swanfence.com K WE SHIP COAST TO COAST 3,000 + PANELS of 6 X 10 & 6 X 14 ARE IN STOCK C 36 or placed upon any property without first obtaining a fence permit. Plans indicating specific locations, material, type, and height of the proposed fence or wall shall accompany the permit application. Fence construction standards: ��� Location: A fence, including all posts, bases and other structural parts, shall be located completely within the boundaries of the lot on which it is located. No fence shall be located closer than 12 inches to a public sidewalk. ��� A copy of the plat of survey of the lot upon which the fence or wall is to be constructed shall be submitted to illustrate the location of the proposed fence. ��� Construction: Fences shall be designed and constructed to resist a horizontal wind pressure of not less than 30 pounds per square foot. ��� Finished side: All fences shall be designed and constructed with the finished surface facing the neighboring property with the support posts placed to the inside, except in such cases where the posts are an integral part of the fence design which enhances the appearance of the fence. ��� Gate opening: Except for the corner lots and rear yard of through lots, every fence which creates a wholly enclosed area and adjoins an existing or proposed street right-of-way, shall include a gate to provide access to the right-of-way. This provision does not apply to corner lots or to the rear yard of a through lot. ��� Business and industrial: Property within any business or industrial zoning district which abuts residentially zoned property shall be landscaped and screened. ��� No fence or wall shall exceed a maximum of three feet above the street grade within the visibility triangle. The purpose of this requirement is to provide for visual clearance and traffic safety. ��� Clearance from utilities located at grade. All fences must maintain: ��� Three foot clearance from all sides of utility pedestals. ��� Six foot frontal clearance and three foot side clearance from all transformers. ��� Fence must be a minimum of 4 inches from grade at the bottom edge. ��� Ten foot frontal clearance and three foot side clearance from all switch boxes. ��� Barbed wire and electric fences: Barbed wire, razor wire, concertina, and the electrification of fences are expressly prohibited except in certain continued on page 38